Product Details | REMOTE CONTROL LEVER
1560-00-710-4432 A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.20311900057Specialized Test and Handling Equipment, Nuclear Ordnance16800049Miscellaneous Aircraft Accessories and Components30400042Miscellaneous Power Transmission Equipment
Part Alternates: 204060761003, 204-060-761-003, 2040607613, 204-060-761-3, 1560-00-710-4432, 00-710-4432, 1560007104432, 007104432
Aircraft and Airframe Structural Components | Airframe Structural Components
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
15 | 01 JAN 1963 | 00-710-4432 | 22099 ( LEVER, REMOTE CONTROL ) |
Request a Quote
Comments | What our customers are saying...
Related Products | NSN 1560-00-710-4432
1560-00-710-4848, 1560-00-710-5721, 1560-00-710-5725, 1560-00-710-6137, 1560-00-710-6958
Technical Data | NSN 1560-00-710-4432
Characteristic | Specifications |
---|---|
MATERIAL | ALUMINUM ALLOY |
MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-601, ALLOY 356 FED SPEC SINGLE MATERIAL RESPONSE |
CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 2.580 INCHES NOMINAL |
SHAFT END THICKNESS | 0.250 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
LINK END HOLE DIAMETER | 0.1894 INCHES MINIMUM AND 0.1899 INCHES MAXIMUM |
DISTANCE BETWEEN FORK INSIDE SPREAD | 0.437 INCHES MINIMUM AND 0.442 INCHES MAXIMUM |
BORE TYPE | PLAIN STRAIGHT |
BORE DIAMETER | 0.3750 INCHES MINIMUM AND 0.3755 INCHES MAXIMUM |
BORE LENGTH | 0.250 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
III END ITEM IDENTIFICATION | FUSELAGE SECTION, ACFT |
MANUFACTURERS CODE | 97499 |
DESIGN CONTROL REFERENCE | 204-060-761-3 |
Restrictions/Controls & Freight Information | NSN 1560-00-710-4432
Category | Code | Description |
---|---|---|
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | B | Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.) |
Precious Metals Indicator Code: | U | Precious metal type is unknown |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
Category | Code | Description |
---|---|---|
NMF Description | 133300 | MACHINERY/MACHINES NOI |
Less than car load rating | W | Rating Variable |
Less than truck load rating | W | Rating Variable |
Water commodity Code | 671 | unknown |
Originating Activity Code | XX | |
Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
Air Commodity | ||
Air Special Handling | Z | No special handling required. |
Special Handling Code | 9 | unknonwn |
HAZMAT | ||
Type of Cargo | Z | No special type of cargo code applicable |