Product Details | REMOTE CONTROL LEVER
1560-01-334-7619 A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.20311900057Specialized Test and Handling Equipment, Nuclear Ordnance16800049Miscellaneous Aircraft Accessories and Components30400042Miscellaneous Power Transmission Equipment
Part Alternates: 013347619
Aircraft and Airframe Structural Components | Airframe Structural Components
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 15 | 01-334-7619 | 22099 ( LEVER, REMOTE CONTROL ) |
Drawings & Photos | NSN 1560-01-334-7619
Request a Quote
Comments | What our customers are saying...
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Related Products | NSN 1560-01-334-7619
1560-01-334-7762, 1560-01-334-7770, 1560-01-334-7771, 1560-01-334-8075, 1560-01-334-8076
Technical Data | NSN 1560-01-334-7619
| Characteristic | Specifications |
|---|---|
| MATERIAL | TITANIUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-9047, COMP 5 MIL SPEC SINGLE MATERIAL RESPONSE |
| STYLE DESIGNATOR | A5 ONE HOLE TONGUE LINK END, SECURING HOLE SHAFT END |
| OVERALL WIDTH | 0.510 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 1.057 INCHES MINIMUM AND 1.067 INCHES MAXIMUM |
| SHAFT END THICKNESS | 0.593 INCHES NOMINAL |
| LINK END THICKNESS | 0.390 INCHES NOMINAL |
| LINK END HOLE DIAMETER | 0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| BORE TYPE | PLAIN STRAIGHT |
| BORE DIAMETER | 0.375 INCHES MINIMUM AND 0.377 INCHES MAXIMUM |
| BORE LENGTH | 0.593 INCHES NOMINAL |
| SPECIAL FEATURES | OFFSET HEIGHT: 0.513 IN. NOMINAL |
| III END ITEM IDENTIFICATION | AH-64A |
Restrictions/Controls & Freight Information | NSN 1560-01-334-7619
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||