Product Details | UNIVERSAL JOINT YOKE
2520-00-773-5473 A component of a universal joint designed for vehicular applications. Consists of a fork-like device to accommodate the spider and bearings of a universal joint by various attaching methods. The opposite end must have either a flange, hub, or splined stub shaft which is designed to be attached to a driving or driven member. For items with a shaft, the length of the plain portion must not exceed the length of the splines.
Part Alternates: 3663160, 7735473, 2520-00-773-5473, 00-773-5473, 2520007735473 , 007735473
Vehicular Equipment Components | Vehicular Power Transmission Components
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
25 | 01 JAN 1962 | 00-773-5473 | 52120 ( YOKE, UNIVERSAL JOINT, VEHICULAR ) |
Cross Reference | NSN 2520-00-773-5473
Part Number | Cage Code | Manufacturer |
---|---|---|
2520007735473 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES |
3663160 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV |
3663160 | 22852 | SPALLA INC |
3663160 | 24617 | GENERAL MOTORS CORP |
3663160 | 7X677 | GENERAL MOTORS LLC DBA GENERAL MOTORS |
7735473 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
Request a Quote
Comments | What our customers are saying...
NSNs for Compare ( up to 4 ): Add 2520-00-773-5473
Related Products | NSN 2520-00-773-5473
2520-00-773-5479, 2520-00-773-5491, 2520-00-773-5496, 2520-00-773-5506, 2520-00-773-5511
Technical Data | NSN 2520-00-773-5473
Characteristic | Specifications |
---|---|
FORK HEIGHT | 4.750 INCHES NOMINAL |
SHAFT SPLINE QUANTITY | 10 |
SPECIAL FEATURES | C TO C DISTANCE BETWEEN HOLES 2.748 IN. MIN,2.754 IN. MAX BY 1.654 IN. MIN,1.660 IN. MAX C TO C BOLT HOLES |
(NON-CORE DATA) MAJOR DIAMETER | 1.9675 INCHES MINIMUM AND 1.9755 INCHES MAXIMUM |
(NON-CORE DATA) WIDTH | 0.302 INCHES MINIMUM AND 0.303 INCHES MAXIMUM |
(NON-CORE DATA) OUTSIDE DIAMETER | 2.597 INCHES MINIMUM AND 2.599 INCHES MAXIMUM |
(NON-CORE DATA) FORK WIDTH | 4.1850 INCHES MINIMUM AND 4.1865 INCHES MAXIMUM |
(NON-CORE DATA) MINOR DIAMETER | 1.694 INCHES MINIMUM AND 1.702 INCHES MAXIMUM |
(NON-CORE DATA) PROTECTOR TYPE | DIRT SLINGER |
(NON-CORE DATA) BOLT HOLE DIAMETER | 0.387 INCHES MINIMUM AND 0.396 INCHES MAXIMUM |
(NON-CORE DATA) FORK DEPTH | 2.125 INCHES NOMINAL |
(NON-CORE DATA) HUB MACHINED SURFACE FINISH OUTSIDE LENGTH | 1.500 INCHES NOMINAL |
(NON-CORE DATA) OUTER PERIPHERY MACHINED SURFACE FINISH | INCLUDED |
(NON-CORE DATA) HUB END THREAD PROVISION | UNTHREADED |
(NON-CORE DATA) HUB BORE | INCLUDED |
(NON-CORE DATA) OUTSIDE SHAPE | ROUND |
(NON-CORE DATA) BEARING RECESS/KEYWAY DEPTH | 0.422 INCHES NOMINAL |
(NON-CORE DATA) CONNECTION END TYPE | HUB |
(NON-CORE DATA) FSC APPLICATION DATA | YOKE,UNIVERSAL JOINT,W/SLINGER,REAR AXLE PROPELLER SHAFT,LANDING VEHICLE DUKW353 |
Restrictions/Controls & Freight Information | NSN 2520-00-773-5473
Category | Code | Description |
---|---|---|
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | B | Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.) |
Precious Metals Indicator Code: | U | Precious metal type is unknown |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Category | Code | Description |
---|---|---|
NMF Description | 133300 | MACHINERY/MACHINES NOI |
Less than car load rating | M | 85 |
Less than truck load rating | W | Rating Variable |
Water commodity Code | 885 | unknown |
Originating Activity Code | XX | |
Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
Air Commodity | V | Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above. |
Air Special Handling | Z | No special handling required. |
Special Handling Code | 9 | unknonwn |
HAZMAT | ||
Type of Cargo | Z | No special type of cargo code applicable |