NSN 4330-01-104-6341 HC9500SUJ8H, HSA005622 , LE-10

Product Details | FLUID FILTER ELEMENT


4330-01-104-6341 A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.20916500058Aircraft Hydraulic, Vacuum, and De-icing System Components29100042Engine Fuel System Components, Nonaircraft29150064Engine Fuel System Components, Aircraft and Missile Prime Movers29400064Engine Air and Oil Filters, Strainers, and Cleaners, Nonaircraft29450059Engine Air and Oil Filters, Cleaners, Aircraft Prime Moving43300057Centrifugals, Separators, and Pressure and Vacuum Filters5999000065300053Hospital Furniture, Equipment, Utensils, and Supplies66300029Chemical Analysis Instruments

Part Alternates: HC9500SUJ8H, HSA005622 , LE-10, LE10, 10007990 , 1357704, 2GH851, 4330-01-104-6341, 01-104-6341, 4330011046341, 011046341

Pumps and Compressors | Centrifugals, Separators, and Pressure and Vacuum Filters

Supply Group (FSG) NSN Assign. NIIN
43 07 DEC 1980 01-104-6341

Drawings & Photos | NSN 4330-01-104-6341



Demand History | NSN 4330-01-104-6341


Part Number Request Date QTY Origin
2GH851 2023-11-13 386 DIBBS
P550251 2023-11-13 386 DIBBS
2GH851 2023-10-23 52 DIBBS
P550251 2023-10-23 52 DIBBS
2GH851 2023-09-28 120 DIBBS
P550251 2023-09-28 120 DIBBS
2GH851 2023-06-15 49 DIBBS
P550251 2023-06-15 49 DIBBS
2GH851 2023-05-18 106 DIBBS
P550251 2023-05-18 106 DIBBS
2GH851 2023-02-16 52 DIBBS
P550251 2023-02-16 52 DIBBS
2GH851 2022-12-15 129 DIBBS
P550251 2022-12-15 129 DIBBS
2GH851 2022-09-28 172 DIBBS
P550251 2022-09-28 172 DIBBS
2GH851 2021-09-29 140 DIBBS
P550251 2021-09-29 140 DIBBS
2GH851 2021-09-14 140 DIBBS
P550251 2021-09-14 140 DIBBS
2GH851 2020-09-30 124 DIBBS
P550251 2020-09-30 124 DIBBS
2GH851 2020-09-28 122 DIBBS
P550251 2020-09-28 122 DIBBS
4330-01-104-6341 2018-04-15 487 DIBBS
4330-01-104-6341 2017-05-15 10 DIBBS
4330-01-104-6341 2017-05-03 10 DIBBS
4330-01-104-6341 2017-04-25 516 DIBBS
4330-01-104-6341 2017-04-25 591 DIBBS
4330-01-104-6341 2017-03-07 516 DIBBS
4330-01-104-6341 2017-02-06 591 DIBBS
4330-01-104-6341 2016-11-13 457 DIBBS
4330-01-104-6341 2015-09-30 753 DIBBS
4330-01-104-6341 2014-10-30 562 DIBBS
4330-01-104-6341 2014-07-09 530 DIBBS
4330-01-104-6341 2014-06-19 35 DIBBS
4330-01-104-6341 2014-06-19 250 DIBBS
4330-01-104-6341 2012-12-20 541 DIBBS
4330-01-104-6341 2012-08-13 315 DIBBS
4330-01-104-6341 2012-05-30 366 DIBBS
4330-01-104-6341 2012-04-19 293 DIBBS
4330-01-104-6341 2012-03-22 0 DIBBS
4330-01-104-6341 2010-01-06 269 DIBBS
4330-01-104-6341 2009-11-24 144 DIBBS
4330-01-104-6341 2009-08-24 139 DIBBS
4330-01-104-6341 2009-07-10 269 DIBBS
4330-01-104-6341 2009-06-18 265 DIBBS
4330-01-104-6341 2009-04-20 234 DIBBS
4330-01-104-6341 2009-03-25 19 DIBBS
4330-01-104-6341 2008-07-08 2 Taiwan
LE10 2008-05-28 248 US
4330-01-104-6341 2008-02-29 423 DIBBS
4330-01-104-6341 2006-06-13 0 DIBBS
4330-01-104-6341 2006-06-08 571 DIBBS
4330-01-104-6341 2006-04-20 636 DIBBS

Cross Reference | NSN 4330-01-104-6341


Part Number Cage Code Manufacturer
10007990 3NNX8 BRIGHTON CROMWELL LLC
1357704 13125 CLEVELAND TRENCHER CO INC
2GH851 45152 OSHKOSH CORPORATION
2GH851 75Q65 OSHKOSH DEFENSE, LLC
2GH851 KC7A1 FASTTRAX LTD
HC9500SUJ8H 17238 PALL CORPORATION DBA PALL TRINITY MICRO
HSA005622 Z1480 NQEA MARINE SAFETY PTY LTD
LE-10 60827 ZINGA INDUSTRIES INC
LE-10 Z8427 EMBECA PTY LTD
LE-10 Z9F95 CUSTOM FLUID POWER PTY LTD

Request a Quote



Comments | What our customers are saying...


Honeywell

Thank you very much for the excellent service and professional customer care.

Ernie G. Honeywell
Raytheon

The service was excellent. I can think of no improvements to date that you can make regarding internet sales.

John L. Raytheon
General Dynamics

The representative for WBParts was efficient & handled our request in a timely & professional manner.

Karen G. General Dynamics
US Airforce

Tried two other sources, neither of them responded, was all done online, never spoke to anyone.

Rex S. US Airforce
NASA

The response is quick and the price is often very good. We are completely satisfied.


NSNs for Compare ( up to 4 ): Add 4330-01-104-6341


Technical Data | NSN 4330-01-104-6341


Characteristic Specifications
STYLE DESIGNATOR A28 BOWL
BODY DIAMETER ANY ACCEPTABLE
BODY OVERALL LENGTH ANY ACCEPTABLE
MATERIAL STEEL CORROSION RESISTING FILTERING MEDIUM
FILTERING MEDIA DESIGN MESH SINGLE FILTERING MEDIA RESPONSE
MESH SIZE 100.0
WIRE DIAMETER 0.005 INCHES NOMINAL
DESIGN TYPE NONREUSABLE
FILTRATION RATING IN MICRONS NOT RATED
FLOW DIRECTION OUTSIDE IN
MEDIA FOR WHICH DESIGNED FUEL/OIL, HYDROCARBON
TEMP RATING -65.0 DEG FAHRENHEIT MINIMUM AND 250.0 DEG FAHRENHEIT MAXIMUM
DROP PRESSURE NOT RATED
DIFFERENTIAL PRESSURE NOT RATED
FILTERING SYSTEM FOR WHICH DESIGNED FULL FLOW
SPECIAL FEATURES 141 MICRON

Restrictions/Controls & Freight Information | NSN 4330-01-104-6341


Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 069100 FILTERS:CARTRIDGES/ELEMENTS
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 594 unknown
Originating Activity Code AX Defense Supply Center Columbus
Columbus, OH 43216-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity V Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 4330-01-104-6341


Category Code Description
Materiel Category and Inventory ManagerJ Ground Forces Support Materiel (DLA/GSA Items)
Appropriation and Budget Activity2 Stock Fund Secondary Items
Management Inventory Segment2 NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable.
Specific Group/Generic CodeN Tactical Vehicles
Weapons Systems/End Item or Homogeneous GroupNUHeavy Equipment Transporter (HET), M746, M747, M911
Accounting Requirements CodeX Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDADepartment of the Army
Service OrganizationAU.S. Army
ReparabilityZThis is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item.
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Stores Account Code1Marine Corps Stock Fund Account Item.
Combat Essentiality Code5Critical Repair Part to a Combat Essential End Item. Those parts or components whose failure in a combat essential end item will render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency.
Materiel Management CodeBAll CommoditiesDefense Logistics Agency, (DLA,)
Echelon Management Code2ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDMU.S. Marine Corps
Service OrganizationMU.S. Marine Corps
ReparabilityZNonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code.
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each

Call us today at (321) 473-6075 or Email us at sales@wbparts.com

Supply Chain Solutions Beyond Expectations. Check out the many ways our site can help you. Start Here