Product Details | FIXED ATTENUATOR
5985-01-456-7029
Part Alternates: M1110, 5985-01-456-7029, 01-456-7029, 5985014567029, 014567029
Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
59 | 23 JUN 1998 | 01-456-7029 | 77777 ( ) |
Request a Quote
Comments | What our customers are saying...
NSNs for Compare ( up to 4 ): Add 5985-01-456-7029
Related Products | NSN 5985-01-456-7029
5985-01-456-7115, 5985-01-456-7116, 5985-01-456-7192, 5985-01-456-7488, 5985-01-456-7836
Technical Data | NSN 5985-01-456-7029
Characteristic | Specifications |
---|---|
APPLICATION DESIGN | TRANSMISSION LINE |
INPUT IMPEDANCE RATING IN OHMS | 50.0 |
FREQUENCY RANGE | 0.010 GIGAHERTZ MINIMUM AND 18.000 GIGAHERTZ MAXIMUM |
OPERATING TEMP RANGE | 12.0 TO 40.0 DEG CELSIUS |
BODY STYLE | 5B RECTANGULAR, TERMINAL/TERMINALS ON OPPOSITE SURFACES |
OVERALL LENGTH | 5.000 INCHES NOMINAL |
OVERALL HEIGHT | 5.250 INCHES NOMINAL |
OVERALL WIDTH | 4.000 INCHES NOMINAL |
SPECIAL FEATURES | TYPE N MALE CONNECTOR; USED TO CALIBRATE FEEDTHRU DEVICES LIKE RF POWER METERS; STABILITY 0.5 PCT; RESISTANCE 200 OHM |
Restrictions/Controls & Freight Information | NSN 5985-01-456-7029
Category | Code | Description |
---|---|---|
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | Q | Strategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.” |
Electro-static Discharge Susceptible: | A | No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity |
Precious Metals Indicator Code: | A | Item does not contain precious metal |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
Category | Code | Description |
---|---|---|
No Freight Information |