Product Details | AIRCRAFT SLAT

1560-01-299-8654 A movable control surface attached to the leading edge of a wing or other airfoil which, when extended, creates a slot to allow high-energy air to be introduced into the boundary layer over the top of the airfoil. It prevents stalls at high angles of attack and improves lateral control at lower than normal airspeeds. It is closed during normal flight and forms a profile of the airfoil. Excludes leading edge devices for creating lift that are not slotted to duct air over the top of a wing or other airfoil. Excludes FLAP, WING LANDING.

Part Alternates: 16W022802, 16W022-802, 16W022806, 16W022-806, 16W022836, 16W022-836, 16W022840, 16W022-840, 16W022852, 16W022-852, 1560-01-299-8654, 01-299-8654, 1560012998654, 012998654

Aircraft and Airframe Structural Components | Airframe Structural Components

Supply Group (FSG) NSN Assign. NIIN
15 07 MAY 1989 01-299-8654

Cross Reference | NSN 1560-01-299-8654

Part Number Cage Code Manufacturer
16W022-802 81755 LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN AERONAUTICS
16W022-806 81755 LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN AERONAUTICS
16W022-836 81755 LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN AERONAUTICS
16W022-840 81755 LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN AERONAUTICS
16W022-840 H0643 FOKKER AIRCRAFT B.V.
16W022-840 H0W98 FOKKER SERVICES B.V.
16W022-852 81755 LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN AERONAUTICS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 1560-01-299-8654

Technical Data | NSN 1560-01-299-8654

Characteristic Specifications
MATERIAL ALUMINUM ALLOY
AIRCRAFT LOCATION FLAP,WING-LEADING EDGE MANEUVER
AIRCRAFT MISSION DESIGN SERIES F-16C/D
MANUFACTURERS CODE 81755
DESIGN CONTROL REFERENCE 16W022-840

Restrictions/Controls & Freight Information | NSN 1560-01-299-8654

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:DMunitions List Item or Commerce Control List Item. Demilitarization required. Total destruction of the item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DoD Demilitarization Program Office.)
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 011790 AIRCRAFT PARTS NOI SUB2
Less than car load rating
Less than truck load rating F 150.0
Water commodity Code 671 unknown
Originating Activity Code SU Ogden Air Logistics Center
Hill AFB, UT 84056-5609
Air Dimension Code Z Shipment is not a consolidation, but does exceed 72 inches in one or more dimensions.
Air Commodity
Air Special Handling Z No special handling required.
Special Handling Code R unknonwn
HAZMAT
Type of Cargo 2 Type cargo code not applicable (for Air Force internal use).