NSN 2520-00-311-7832 1893383R1, 3202L1390, 00-311-7832
Product Details | AUTOMOTIVE AXLE SHAFT
2520-00-311-7832 A shaft which is a component of AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, used to transmit rotary motion from the differential assembly either directly or indirectly to the wheel hubs. Excludes shafts with a universal joint or a component of a universal joint attached to it.
Part Alternates: 1893383R1, 3202L1390, 2520-00-311-7832, 00-311-7832, 2520003117832, 003117832
Vehicular Equipment Components | Vehicular Power Transmission Components
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 25 | 01 JAN 1963 | 00-311-7832 | 10852 ( SHAFT, AXLE, AUTOMOTIVE ) |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 2520-00-311-7832
Technical Data | NSN 2520-00-311-7832
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| METALLIC HARDNESS RATING | NOT RATED |
| OVERALL LENGTH | 47.031 INCHES NOMINAL |
| FIRST END TYPE | FLANGED |
| FLANGE OVERALL THICKNESS | 1.375 INCHES NOMINAL |
| FLANGE THICKNESS AT MOUNTING HOLE | 0.438 INCHES NOMINAL |
| FLANGE OUTSIDE DIAMETER | 8.125 INCHES MINIMUM AND 8.130 INCHES MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE AND 3 TAPERED HOLE |
| TAPER MAJOR DIAMETER | 0.948 INCHES NOMINAL |
| FLANGE HOLE TAPER | 6.000 INCHES NOMINAL PER FOOT |
| HOLE DIAMETER | 0.65625 INCHES NOMINAL |
| FIRST END BEARING SEAT | NOT INCLUDED |
| SECOND END TYPE | SPLINED |
| SECOND END SPLINE TYPE | STRAIGHT |
| SECOND END SPLINE QUANTITY | 16 |
| SECOND END SPLINE LENGTH | 2.750 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 2.221 INCHES MINIMUM AND 2.226 INCHES MAXIMUM |
| SECOND END SPLINE MINOR DIAMETER | 2.006 INCHES MINIMUM AND 2.018 INCHES MAXIMUM |
| SECOND END BEARING SEAT | NOT INCLUDED |
| III FSC APPLICATION DATA | VEHICULAR POWER TRANSMISSION COMPONENTS |
| MANUFACTURERS CODE | 3D6E9 |
| DESIGN CONTROL REFERENCE | 3202L1390 |
Restrictions/Controls & Freight Information | NSN 2520-00-311-7832
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| NMF Description | 017900 | AUTO AXLE SHAFTS |
| Less than car load rating | S | 60 |
| Less than truck load rating | S | 60.0 |
| Water commodity Code | 581 | unknown |
| Originating Activity Code | XX | |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | V | Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |