NSN 2520-00-776-7660 6762272, 7767660, 00-776-7660
Product Details | PROTECTION BELLOWS
2520-00-776-7660 A nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.20353400020Hardware, Commercial53420023Hardware, Weapon System93900046Miscellaneous Fabricated Nonmetallic Materials
Part Alternates: 6762272, 7767660, 2520-00-776-7660, 00-776-7660, 2520007767660, 007767660
Vehicular Equipment Components | Vehicular Power Transmission Components
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 25 | 01 JAN 1962 | 00-776-7660 | 35168 ( BELLOWS, PROTECTION ) |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 2520-00-776-7660
Technical Data | NSN 2520-00-776-7660
| Characteristic | Specifications |
|---|---|
| MATERIAL | RUBBER, SYNTHETIC |
| DUROMETER HARDNESS RATING | NOT RATED |
| EXTENDED LENGTH | ANY ACCEPTABLE |
| CONTRACTED LENGTH | ANY ACCEPTABLE |
| NEUTRAL LENGTH | 3.312 INCHES NOMINAL |
| FLANGE BASE | NOT PROVIDED |
| LARGE END OUTSIDE DIAMETER | 3.950 INCHES NOMINAL |
| SMALL END OUTSIDE DIAMETER | 1.597 INCHES NOMINAL |
| LARGE END OUTSIDE LENGTH | 0.688 INCHES NOMINAL |
| LARGE END INSIDE DIAMETER | 3.500 INCHES NOMINAL |
| SMALL END INSIDE DIAMETER | 1.031 INCHES NOMINAL |
| THICKNESS AT BOTH ENDS | 0.225 INCHES MINIMUM AND 0.282 INCHES MAXIMUM |
| THICKNESS BETWEEN ENDS | 0.078 INCHES NOMINAL |
| III FSC APPLICATION DATA | CONTROL LEVER,TRANSMISSION COMBAT TANK |
| MANUFACTURERS CODE | 73342 |
| DESIGN CONTROL REFERENCE | 6762272 |
Restrictions/Controls & Freight Information | NSN 2520-00-776-7660
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| NMF Description | 183780 | TOOLS:BELLOWS IN PKGS |
| Less than car load rating | J | 100.2 |
| Less than truck load rating | J | 100.2 |
| Water commodity Code | 732 | unknown |
| Originating Activity Code | XX | |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | B | Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |