NSN 2530-00-740-0957 2300094-142000.14.0, 2300094142000140, 7400957
Product Details | PROTECTION BELLOWS
2530-00-740-0957 A nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.20353400020Hardware, Commercial53420023Hardware, Weapon System93900046Miscellaneous Fabricated Nonmetallic Materials
Part Alternates: 2300094-142000.14.0, 2300094142000140, 7400957, 2530-00-740-0957, 00-740-0957, 2530007400957, 007400957
Vehicular Equipment Components | Vehicular Brake, Steering, Axle, Wheel, and Track Components
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 25 | 01 JAN 1963 | 00-740-0957 | 35168 ( BELLOWS, PROTECTION ) |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 2530-00-740-0957
Technical Data | NSN 2530-00-740-0957
| Characteristic | Specifications |
|---|---|
| MATERIAL | RUBBER,SYNTHETIC,MIL-R-3065,CLASS RS,GRADE 515AGF OR RUBBER,NATURAL,MIL-R-3065,CLASS RN,GRADE 515AGF |
| DUROMETER HARDNESS RATING | NOT RATED |
| NEUTRAL LENGTH | 4.375 INCHES NOMINAL |
| FLANGE BASE | NOT PROVIDED |
| LARGE END OUTSIDE DIAMETER | 2.000 INCHES NOMINAL |
| SMALL END OUTSIDE DIAMETER | 1.750 INCHES NOMINAL |
| LARGE END OUTSIDE LENGTH | 0.500 INCHES NOMINAL |
| SMALL END OUTSIDE LENGTH | 0.750 INCHES NOMINAL |
| LARGE END INSIDE DIAMETER | 1.250 INCHES NOMINAL |
| SMALL END INSIDE DIAMETER | 1.250 INCHES NOMINAL |
| LARGE END INSIDE LENGTH | 0.500 INCHES NOMINAL |
| SMALL END INSIDE LENGTH | 0.750 INCHES NOMINAL |
| THICKNESS BETWEEN ENDS | 0.047 INCHES NOMINAL |
| III FSC APPLICATION DATA | CONTROL LINKAGE,STEERING,TANK |
Restrictions/Controls & Freight Information | NSN 2530-00-740-0957
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| NMF Description | 156600 | PLASTIC/RUBBER ARTICLE VIZ: |
| Less than car load rating | W | Rating Variable |
| Less than truck load rating | W | Rating Variable |
| Water commodity Code | 772 | unknown |
| Originating Activity Code | XX | |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | V | Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |