Product Details | SLEEVE BUSHING

3120-01-051-4751 A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.20231200026Bearings, Plain, Unmounted53650035Bushings, Rings, Shims, and Spacers

Part Alternates: 16S51015, 16S510-15, 3120-01-051-4751, 01-051-4751, 3120010514751, 010514751

Bearings | Bearings, Plain, Unmounted

Supply Group (FSG) NSN Assign. NIIN
31 02 DEC 1977 01-051-4751

Drawings & Photos | NSN 3120-01-051-4751


Demand History | NSN 3120-01-051-4751

Part Number Request Date QTY Origin
3120-01-051-4751 2017-01-22 304 DIBBS
3120-01-051-4751 2017-01-10 392 DIBBS
3120-01-051-4751 2016-06-171 700 DIBBS
3120-01-051-4751 2016-06-165 33 DIBBS
3120-01-051-4751 2015-01-11 555 DIBBS
3120-01-051-4751 2014-09-258 447 DIBBS
3120-01-051-4751 2014-02-37 328 DIBBS
3120-01-051-4751 2008-11-330 315 DIBBS
3120-01-051-4751 2008-09-269 304 DIBBS
3120-01-051-4751 2007-08-214 407 DIBBS
3120-01-051-4751 2007-06-152 342 DIBBS
3120-01-051-4751 2007-03-80 149 DIBBS

Cross Reference | NSN 3120-01-051-4751

Part Number Cage Code Manufacturer
16S510-15 81755 LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN AERONAUTICS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 3120-01-051-4751

Technical Data | NSN 3120-01-051-4751

Characteristic Specifications
STYLE DESIGNATOR 21C SOLID
OVERALL LENGTH 0.6550 INCHES MINIMUM AND 0.6650 INCHES MAXIMUM
BODY OUTSIDE DIAMETER 1.0000 INCHES MINIMUM AND 1.0020 INCHES MAXIMUM
BODY INSIDE DIAMETER 0.6890 INCHES MINIMUM AND 0.6920 INCHES MAXIMUM
FLANGE OUTSIDE DIAMETER 1.7900 INCHES MINIMUM AND 1.8100 INCHES MAXIMUM
FLANGE WIDTH 0.1400 INCHES NOMINAL
END TO FLANGE DISTANCE 0.1950 INCHES MINIMUM AND 0.2000 INCHES MAXIMUM
III END ITEM IDENTIFICATION F-16 AIRCRAFT
(NON-CORE DATA) RADIUS 0.0620 INCHES NOMINAL
MANUFACTURERS CODE 81755
DESIGN CONTROL REFERENCE 16S510-15

Restrictions/Controls & Freight Information | NSN 3120-01-051-4751

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 093600 BRACKETS/BUSHINGS/JOINTS/MOUNTS ETC
Less than car load rating R 65
Less than truck load rating Q 70.0
Water commodity Code 713 unknown
Originating Activity Code SU Ogden Air Logistics Center
Hill AFB, UT 84056-5609
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Z No special handling required.
Special Handling Code Z unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 3120-01-051-4751

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Materiel Management Aggregation CodeWFSU:F-16 AIR COMBAT FIGHTER
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each