Product Details | METALLIC OVERLAY WELDING POWDER

3439-01-479-2705 A metallic powder used for coating metallic or nonmetallic surfaces by the welding process, to produce a surface resistant to abrasion and/or corrosion. It may be applied with an oxy-acetylene torch, furnace, or with a spray weld gun.

Part Alternates: AMDRY 6420, AMDRY6420, POWCVC, 3439-01-479-2705, 01-479-2705, 3439014792705, 014792705

Metalworking Machinery | Miscellaneous Welding, Soldering, and Brazing Supplies and Accessories

Supply Group (FSG) NSN Assign. NIIN
34 17-OCT-00 01-479-2705

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 3439-01-479-2705

Technical Data | NSN 3439-01-479-2705

Characteristic Specifications
BASIC MATERIAL CHROMIUM
ENVIRONMENTAL PROTECTION ANY ACCEPTABLE
CONTENT WITHIN EACH UNIT PACKAGE 5.0LBS
UNIT PACKAGE TYPE ANY ACCEPTABLE
SPECIAL FEATURES NSN IS USED TO PURCHASE A MINIMUM OF 1 CONTAINER TO A MAXIMUM OF 19 CONTAINERS;CR O,BLOCKY CHEMICAL PRECIPITATE;-45+22 UM (-325 MESH +5 UM).DENSE,CORROSION RESISTANT COATINGS USED ON PUMP SEAL AREAS,GROUNDS, ROLLS AND WEAR RINGS.RECOMMENDED FOR RESISTANCE TO WEAR BY ABRASIVE GRAINS,HARD SURFACES,PARTICLE EROSION AND CAVIATION ALL AT TEMPREATURES BELOW 1000DEG (F).COATINGS ARE INSOLUBLE IN ACIDS,ALKALIS AND ALCOHOL

Restrictions/Controls & Freight Information | NSN 3439-01-479-2705

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information