Product Details | NONMETALLIC HOSE ASSEMBLY
4720-00-415-1937 A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT; and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.20242100023Fire Fighting Equipment47200024Hose and Flexible Tubing
Part Alternates: 31626071, 3162607-1, 6887773, 97886, 4720-00-415-1937, 00-415-1937, 4720004151937, 004151937
Pipe, Tubing, Hose, and Fittings | Hose and Flexible Tubing
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 47 | 01 MAY 1974 | 00-415-1937 | 20311 ( HOSE ASSEMBLY, NONMETALLIC ) |
Demand History | NSN 4720-00-415-1937
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| 4720-00-415-1937 | 2022-12-27 | 52 | US |
| 3162607-1 | 2022-12-27 | 52 | DIBBS |
| 97886 | 2022-12-27 | 52 | DIBBS |
| 3162607-1 | 2022-12-15 | 52 | DIBBS |
| 97886 | 2022-12-15 | 52 | DIBBS |
| 3162607-1 | 2022-11-29 | 65 | DIBBS |
| 97886 | 2022-11-29 | 65 | DIBBS |
| 3162607-1 | 2022-11-14 | 65 | DIBBS |
| 97886 | 2022-11-14 | 65 | DIBBS |
| 3162607-1 | 2021-11-29 | 77 | DIBBS |
| 97886 | 2021-11-29 | 77 | DIBBS |
| 3162607-1 | 2021-11-14 | 77 | DIBBS |
| 97886 | 2021-11-14 | 77 | DIBBS |
| 3162607-1 | 2020-11-22 | 37 | DIBBS |
| 97886 | 2020-11-22 | 37 | DIBBS |
| 3162607-1 | 2020-11-05 | 37 | DIBBS |
| 97886 | 2020-11-05 | 37 | DIBBS |
| 3162607-1 | 2020-10-08 | 3 | DIBBS |
| 97886 | 2020-10-08 | 3 | DIBBS |
| 6887773 | 2020-09-22 | 1 | Malaysia |
| 3162607-1 | 2020-05-28 | 9 | DIBBS |
| 97886 | 2020-05-28 | 9 | DIBBS |
| 3162607-1 | 2020-04-03 | 121 | DIBBS |
| 97886 | 2020-04-03 | 121 | DIBBS |
| 3162607-1 | 2020-03-23 | 121 | DIBBS |
| 97886 | 2020-03-23 | 121 | DIBBS |
| 3162607-1 | 2020-02-10 | 27 | DIBBS |
| 97886 | 2020-02-10 | 27 | DIBBS |
| 4720-00-415-1937 | 2018-05-24 | 23 | DIBBS |
| 4720-00-415-1937 | 2017-10-20 | 10 | Malaysia |
| 4720-00-415-1937 | 2017-10-10 | 10 | Malaysia |
| 4720-00-415-1937 | 2017-08-21 | 22 | DIBBS |
| 4720-00-415-1937 | 2016-11-13 | 29 | DIBBS |
| 4720-00-415-1937 | 2016-10-31 | 43 | DIBBS |
| 4720-00-415-1937 | 2016-10-05 | 36 | DIBBS |
| 4720-00-415-1937 | 2016-01-19 | 49 | DIBBS |
| 4720-00-415-1937 | 2016-01-05 | 49 | DIBBS |
| 4720-00-415-1937 | 2015-10-19 | 31 | DIBBS |
| 4720-00-415-1937 | 2015-10-08 | 31 | DIBBS |
| 4720-00-415-1937 | 2014-11-30 | 34 | DIBBS |
| 4720-00-415-1937 | 2014-07-21 | 38 | DIBBS |
| 4720-00-415-1937 | 2014-07-09 | 38 | DIBBS |
| 4720-00-415-1937 | 2014-02-18 | 53 | DIBBS |
| 4720-00-415-1937 | 2014-02-03 | 53 | DIBBS |
| 4720-00-415-1937 | 2013-10-02 | 60 | DIBBS |
| 4720-00-415-1937 | 2013-09-04 | 116 | DIBBS |
| 4720-00-415-1937 | 2013-08-20 | 116 | DIBBS |
| 4720-00-415-1937 | 2012-06-07 | 54 | DIBBS |
| 4720-00-415-1937 | 2012-03-02 | 57 | DIBBS |
| 4720-00-415-1937 | 2011-08-25 | 65 | DIBBS |
| 4720-00-415-1937 | 2011-05-18 | 20 | DIBBS |
| 4720-00-415-1937 | 2011-01-24 | 59 | DIBBS |
Request a Quote
Comments | What our customers are saying...
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
NSNs for Compare ( up to 4 ): Add 4720-00-415-1937
Related Products | NSN 4720-00-415-1937
4720-00-415-1938, 4720-00-415-1940, 4720-00-415-4652, 4720-00-415-4667, 4720-00-415-5388
Technical Data | NSN 4720-00-415-1937
| Characteristic | Specifications |
|---|---|
| INNER CONVEYING TUBE MATERIAL | PLASTIC, POLYTETRAFLUOROETHYLENE |
| INSIDE SURFACE CONDITION | CONVOLUTED |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| EXTERIOR COLOR | ANY ACCEPTABLE |
| CROSS-SECTIONAL SHAPE STYLE | 1 ROUND |
| INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.300 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | 9.495 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 3.000 INCHES |
| FIRST END CONNECTION TYPE | THREADED INTERNAL TUBE |
| FIRST END STYLE DESIGNATOR | C3 SWIVEL NUT FLARE |
| FIRST END SEAT ANGLE IN DEG | 37.0 |
| FIRST END CONNECTION DESIGN | ELBOW |
| FIRST END FLOW ANGLE IN DEG | 60.0 |
| FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING ALUMINUM ALLOY, QQ-A-225/8, ALLOY 6061, T6 |
| FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ANODIZED |
| FIRST END THREAD SERIES DESIGNATOR | UN |
| FIRST END NOMINAL THREAD SIZE | 1.312 INCHES |
| FIRST END THREAD QUANTITY PER INCH | 12 |
| FIRST END THREAD CLASS | 2B |
| FIRST END THREAD DIRECTION | RIGHT-HAND |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END CONNECTION TYPE | RAISED FACE FLANGE |
| SECOND END STYLE DESIGNATOR | G7 RAISED SWIVEL |
| SECOND END RAISED FACE HEIGHT | 0.015 INCHES NOMINAL |
| SECOND END RAISED FACE DIAMETER | 1.510 INCHES NOMINAL |
| SECOND END FLANGE CONSTRUCTION | SOLID |
| SECOND END FLANGE SHAPE STYLE | 5 RECTANGULAR |
| SECOND END FLANGE THICKNESS | 0.297 INCHES NOMINAL |
| SECOND END FLANGE LENGTH | 1.750 INCHES NOMINAL |
| SECOND END FLANGE WIDTH | 1.750 INCHES NOMINAL |
| SECOND END BOLT HOLE DIAMETER | 0.271 INCHES NOMINAL |
| SECOND END DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.312 INCHES NOMINAL |
| SECOND END DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.312 INCHES NOMINAL |
| SECOND END BOLT HOLE QUANTITY | 4 |
| SECOND END CONNECTION DESIGN | ELBOW |
| SECOND END FLOW ANGLE IN DEG | 80.0 |
| SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING ALUMINUM ALLOY, QQ-A-367, ALLOY 2014 |
| SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ANODIZED |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 95.0 |
| TEMP RATING | NOT RATED |
| MAXIMUM OPERATING PRESSURE | NOT RATED |
| BURST TEST PRESSURE | 350.0 POUNDS PER SQUARE INCH |
| EXTERNAL PROTECTION TYPE AND LOCATION | OVERALL FIRE SHIELD, SILICONE RUBBER |
| III SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCES 78570 HAVE INDICATED THEIR PART NUMBER |
Restrictions/Controls & Freight Information | NSN 4720-00-415-1937
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| NMF Description | 051140 | HOSE:NOI TUBING |
| Less than car load rating | Q | 70 |
| Less than truck load rating | W | Rating Variable |
| Water commodity Code | 736 | unknown |
| Originating Activity Code | SE | San Antonio Air Logistics Center Kelly AFB, TX 78241-5000 |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | B | Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | Z | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 4720-00-415-1937
Air Force
Navy| Category | Code | Description |
|---|---|---|
| Budget Code | 9 | General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors. |
| Price Validation | N | The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
|
| Materiel Management Aggregation Code | OJ | SX:"ALLISON JET ENGINES & COMPONENTS, T-56" |
| Fund Code | SF | Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point. |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DF | Department of the Air Force |
| Service Organization | F | U.S. Air Force |
| Reparability | N | Stock Fund (except Munitions) |
| Acquisition Advice Codes | D | DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative | Purchasing | QTY UOM |
1 EA : Each |
| Category | Code | Description |
|---|---|---|
| Cognizance Codes | 9B | Navy-owned stocks of DLA material Naval Inventory Control Point, Mechanicsburg |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DN | Department of the Navy |
| Service Organization | N | U.S. Navy |
| Acquisition Advice Codes | D | DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative | Purchasing | QTY UOM |
1 EA : Each |