NSN 5310-01-129-2725 MS15795806, MS15795-806, NASM15795806
Product Details | FLAT WASHER
5310-01-129-2725 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Part Alternates: MS15795806, MS15795-806, NASM15795806, NASM15795-806, FFW92, FF-W-92, 533830-806, 5310-01-129-2725, 01-129-2725, 5310011292725, 533830806, 011292725
Hardware and Abrasives | Nuts and Washers
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 04 APR 1982 | 01-129-2725 | 13393 ( WASHER, FLAT ) |
Demand History | NSN 5310-01-129-2725
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| MS15795806 | 2025-11-317 | 1932 | Israel |
| MS15795806 | 2025-11-311 | 1932 | Israel |
| FFW92 | 2025-06-161 | 16 | United States |
| MS15795806 | 2025-05-142 | 100 | United States |
| MS15795806 | 2025-04-91 | 27 | Japan |
| FF-W-92 | 2023-01-18 | 60 | Saudi Arabia |
| MS15795806 | 2020-12-363 | 420 | United States |
| MS15795806 | 2020-12-358 | 420 | United States |
| MS15795806 | 2020-06-169 | 54 | US |
| MS15795806 | 2019-12-336 | 100 | United States |
| 5310-01-129-2725 | 2019-09-245 | 5000 | DIBBS |
| MS15795806 | 2019-06-156 | 30 | United States |
| FFW92 | 2018-07-207 | 2 | United States |
| 5310-01-129-2725 | 2018-04-112 | 5000 | DIBBS |
| MS15795806 | 2017-12-353 | 100 | United States |
| MS15795806 | 2017-10-298 | 600 | Malaysia |
| FFW92 | 2016-08-217 | 21 | US |
| MS15795806 | 2016-07-211 | 700 | United States |
| MS15795806 | 2016-04-96 | 1449 | US |
| 5310-01-129-2725 | 2016-03-88 | 1824 | DIBBS |
| MS15795-806 | 2016-02-48 | 118800 | United States |
| MS15795806 | 2015-05-126 | 300 | United States |
| MS15795806 | 2014-04-106 | 12 | United States |
| 533830806 | 2014-02-44 | 10 | United States |
| MS15795806 | 2014-02-35 | 1352 | United States |
| MS15795806 | 2014-02-33 | 1000 | IN |
| 5310-01-129-2725 | 2013-04-120 | 1112 | DIBBS |
| MS15795806 | 2012-08-233 | 1500 | US |
| MS15795-806 | 2012-06-163 | 160 | India |
| MS15795-806 | 2012-05-145 | 320 | US |
| MS15795806 | 2011-12-361 | 30 | United States |
| FFW92 | 2011-10-304 | 495 | United States |
| MS15795806 | 2011-01-17 | 500 | India |
| MS15795806 | 2010-03-80 | 50 | US |
| 5310-01-129-2725 | 2010-01-06 | 10 | DIBBS |
| 5310-01-129-2725 | 2009-03-85 | 1050 | DIBBS |
| 5310-01-129-2725 | 2009-01-14 | 811 | DIBBS |
| 5310-01-129-2725 | 2008-11-316 | 1128 | DIBBS |
| 5310-01-129-2725 | 2008-10-298 | 58 | DIBBS |
| 5310-01-129-2725 | 2008-09-254 | 33 | DIBBS |
| 5310-01-129-2725 | 2008-09-248 | 210 | DIBBS |
| 5310-01-129-2725 | 2008-07-210 | 10 | DIBBS |
| 5310-01-129-2725 | 2008-06-155 | 66 | DIBBS |
| 5310-01-129-2725 | 2008-05-134 | 1 | DIBBS |
| 5310-01-129-2725 | 2008-02-46 | 4 | DIBBS |
Cross Reference | NSN 5310-01-129-2725
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 533830-806 | 96214 | RAYTHEON COMPANY DBA RAYTHEON |
| FF-W-92 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES |
| MS15795-806 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS |
| NASM15795-806 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES |
Request a Quote
What Our Customers Say
Compare
Related Products | NSN 5310-01-129-2725
Technical Data | NSN 5310-01-129-2725
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL CORROSION RESISTING OVERALL |
| SURFACE TREATMENT | PRIMER AND ENAMEL OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-27316 TYI CL3 MIL SPEC 1ST TREATMENT RESPONSE AND 595 TY II CL3 GRA2 FED STD 2ND TREATMENT RESPONSE OVERALL |
| COLOR | GRAY OVERALL |
| HOLE DIAMETER | 0.156 INCHES NOMINAL |
| PERIPHERAL SHAPE STYLE | 1 ROUND |
| OVERALL DIAMETER | 0.375 INCHES NOMINAL |
| CENTER HOLE SHAPE STYLE | 1 ROUND |
| CROSS-SECTIONAL SHAPE STYLE | 1 RECTANGULAR |
| THICKNESS | 0.049 INCHES NOMINAL |
| MANUFACTURERS CODE | 81348 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FF-W-92 |
| MANUFACTURERS CODE | 80205 |
| DESIGN CONTROL REFERENCE | NASM15795-806 |
Restrictions/Controls & Freight Information | NSN 5310-01-129-2725
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| NMF Description | 194160 | WASHER OR GASKETS, IRON OR STEEL, |
| Less than car load rating | ||
| Less than truck load rating | U | 50.0 |
| Water commodity Code | 713 | unknown |
| Originating Activity Code | ZG | Germany ZH ZJ |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | B | Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 5310-01-129-2725
| Category | Code | Description |
|---|---|---|
| Budget Code | 9 | General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors. |
| Materiel Management Aggregation Code | IY | TG:"GROUND RADIO COMMUNICATIONS, GROUND COMMUNICATIONS PROJECTS, COMPASS LINK DEFENSE SATELLITE COMMUNICATIONS SYSTEM (DSCS) 439L, COMMUNICATION SYSTEM. 469L, CONVERSION OF RANGE TELEMETRY SYSTEM (CORTS) 484L, MOBILE SECURE VOICE SYSTEM, 484N, PACIFIC AREA COMMUNICATION SYSTEM 486L, EUROPEAN WIDEBAND RADIO RELAY SYSTEM, 487L, SURVIVAL LOW FREQUENCY SYSTEM, 487M, VLF/LF SPECIAL PURPOSE COMMUNICATIONS SYSTEM, 488L, GREEN PINE SYSTEM, 489L, FOX-THULE TROPO SYSTEM, 490L DCS AUTOVON (OVERSEAS) SYSTEM, 439L, SECURE V " |
| Price Validation | N | The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
|
| Fund Code | SF | Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point. |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DF | Department of the Air Force |
| Service Organization | F | U.S. Air Force |
| Reparability | N | Stock Fund (except Munitions) |
| Acquisition Advice Codes | Z | INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |
| Category | Code | Description |
|---|---|---|
| Stores Account Code | 1 | Marine Corps Stock Fund Account Item. |
| Combat Essentiality Code | 2 | Non-Critical Repair Part. Repair parts or major components whose failure in an end item will not render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency, and which do not fit the definition of Code 3 or 4 items. |
| Materiel Management Code | B | All CommoditiesDefense Logistics Agency, (DLA,) |
| Echelon Management Code | 2 | ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled. |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DM | U.S. Marine Corps |
| Service Organization | M | U.S. Marine Corps |
| Reparability | Z | Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code. |
| Acquisition Advice Codes | Z | INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |
| Category | Code | Description |
|---|---|---|
| Cognizance Codes | 9B | Navy-owned stocks of DLA material Naval Inventory Control Point, Mechanicsburg |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DN | Department of the Navy |
| Service Organization | N | U.S. Navy |
| Acquisition Advice Codes | Z | INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |
| Category | Code | Description |
|---|---|---|
| Inventory Account Codes | A | Appropriations Purchase Account item managed for the Coast Guard by the respective Inventory Control Point. An unfunded requisition is required. |
| Inventory Account Codes | 0 | Item not controlled by serial number. |
| Source of Supply | ZQC | Commanding Officer Department of Homeland Security USCG Aviation Logistics Center 1664 Weeksville Road Elizabeth City, NC 27909 |
| Agency | GP | U.S. Coast Guard |
| Service Organization | C | U.S. Coast Guard |
| Reparability | C | |
| Acquisition Advice Codes | C | SERVICE/AGENCY-MANAGED (Service/Agency use only.) # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by individual Services supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |



