NSN 5310-01-352-9577 AB960C8L, AN960C08L, AN960C8L

Product Details | FLAT WASHER

5310-01-352-9577 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Part Alternates: AB960C8L, AN960C08L, AN960C8L, NAS1149CN816R, CAV1063P, CAV10-63P, CIPRDNAS1149CN816R, CIPRD-NAS1149CN816R, 73201332, 732013-32, 05032-0044, 3100D04070, 310-0D04-070 , 5310-01-352-9577, 01-352-9577, 5310013529577, 050320044, 013529577

Hardware and Abrasives | Nuts and Washers

Supply Group (FSG)	NSN Assign.	NIIN	Item Name Code (INC)
53	04 FEB 1992	01-352-9577	13393 ( WASHER, FLAT )

Drawings & Photos | NSN 5310-01-352-9577

Part Number	Request Date	QTY	Origin
5310-01-352-9577	2025-06-181	200	US
NAS1149CN816R	2024-05-138	48	IN
NAS1149CN816R	2024-02-45	20	Malaysia
AN960C8L	2023-05-125	800	United States
NAS1149CN816R	2022-09-244	6	Poland
NAS1149CN816R	2022-05-124	40	US
NAS1149CN816R	2022-03-80	200	United States
NAS1149CN816R	2022-01-10	1000	United States
NAS1149CN816R	2021-10-300	1000	United States
5310-01-352-9577	2021-05-134	5	US
AN960C8L	2021-05-123	48	US
NAS1149CN816R	2020-10-275	8	United States
NAS1149CN816R	2020-05-147	1000	US
AN960C8L	2019-04-112	7	United States
5310-01-352-9577	2019-01-29	25	United States
5310-01-352-9577	2019-01-17	100	United States
NAS1149CN816R	2018-02-44	20	United States
NAS1149CN816R	2017-03-60	154	United States
5310-01-352-9577	2016-12-353	29614	DIBBS
5310-01-352-9577	2016-12-339	28919	DIBBS
NAS1149CN816R	2016-04-96	23	US
AN960C8L	2016-04-96	207	US
AN960C8L	2016-03-90	540	KR
5310-01-352-9577	2016-03-87	47299	DIBBS
5310-01-352-9577	2016-03-66	91264	DIBBS
AN960C8L	2016-02-34	100	Malaysia
AN960C8L	2015-09-254	8	United States
AN960C8L	2015-03-70	100	CA
NAS1149CN816R	2014-11-321	100	United States
NAS1149CN816R	2014-11-317	1512	United States
5310-01-352-9577	2014-07-195	12	United States
AN960C8L	2013-12-357	45	United States
NAS1149CN816R	2013-06-168	6	United States
NAS1149CN816R	2013-05-134	50	CZ
AN960C8L	2012-11-310	210
NAS1149CN816R	2012-01-31	40	United Kingdom
AN960C8L	2011-09-266	1000	United States
AN960C8L	2011-09-257	1000	United States
NAS1149CN816R	2011-07-202	2100	TR
NAS1149CN816R	2011-02-46	16	United States
AN960C8L	2011-02-39	40	United States
AN960C8L	2011-02-39	112	United States
AN960C8L	2011-02-39	8	United States
AN960C8L	2011-02-39	48	United States
AN960C8L	2011-02-39	200	United States
AN960C8L	2011-02-39	32	United States
AN960C8L	2011-02-32	18	United States
AN960C8L	2011-01-20	600	United States
NAS1149CN816R	2011-01-20	600	United States
AN960C8L	2010-10-300	18	United States
5310-01-352-9577	2010-08-216	78861	DIBBS
5310-01-352-9577	2010-04-97	375374	DIBBS
AN960C8L	2009-10-302	250	Italy
5310-01-352-9577	2009-09-273	20	United States
AN960C8L	2009-07-197	100	US
AN960C8L	2009-02-43	100	India
NAS1149CN816R	2008-09-246	100	US
NAS1149CN816R	2008-07-196	279	US

Cross Reference | NSN 5310-01-352-9577

Part Number	Cage Code	Manufacturer
05032-0044	26344	NEW HAVEN MFG CORP
732013-32	73030	HAMILTON SUNDSTRAND CORPORATION
AB960C8L	88044	AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
AN960C08L	88044	AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
AN960C8L	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
AN960C8L	88044	AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
CAV10-63P	11871	RECON/OPTICAL, INC.
CIPRD-NAS1149CN816R	14153	DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER
NAS1149CN816R	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES

Request a Quote

What Our Customers Say

Thank you very much for the excellent service and professional customer care.

Ernie G. Honeywell

The service was excellent. I can think of no improvements to date that you can make regarding internet sales.

John L. Raytheon

The representative for WBParts was efficient & handled our request in a timely & professional manner.

Karen G. General Dynamics

Tried two other sources, neither of them responded, was all done online, never spoke to anyone.

Rex S. US Airforce

The response is quick and the price is often very good. We are completely satisfied.

Patricia S. NASA

Compare

NSNs for Compare ( up to 4 ): Add 5310-01-352-9577

Compare

Related Products | NSN 5310-01-352-9577

5310-01-352-9578, 5310-01-352-9579, 5310-01-352-9580, 5310-01-352-9581, 5310-01-352-9582

Technical Data | NSN 5310-01-352-9577

Characteristic	Specifications
MATERIAL	STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 OR STEEL COMP 321 OR STEEL COMP 347 OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HOLE DIAMETER	0.164 INCHES MINIMUM AND 0.184 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE	1 ROUND
OVERALL DIAMETER	0.370 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE	1 ROUND
CROSS-SECTIONAL SHAPE STYLE	1 RECTANGULAR
THICKNESS	0.014 INCHES MINIMUM AND 0.018 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA	80205-NAS1149 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

Restrictions/Controls & Freight Information | NSN 5310-01-352-9577

Restrictions
Freight

Category	Code	Description
Shelf-Life Code:	0	Nondeteriorative
Hazardous Material Indicator Code	N	There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:	A	Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:	U	UNCLASSIFIED
Precious Metals Indicator Code:	A	Item does not contain precious metal
Criticality Code:	F	The item is an Aviation Critical Safety Item/Flight Safety Critical Aircraft Part ((ACSI/FSCAP).
Automatic Data Processing Equipment:	0	Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)

Category	Code	Description
NMF Description	194160	WASHER OR GASKETS, IRON OR STEEL,
Less than car load rating	U	50
Less than truck load rating	U	50.0
Water commodity Code	713	unknown
Originating Activity Code	KZ	Defense Supply Center Philadelphia Philadelphia, PA 19101
Air Dimension Code	A	Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity	V	Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling	Z	No special handling required.
Special Handling Code	9	unknonwn
HAZMAT
Type of Cargo	Z	No special type of cargo code applicable

Management | NSN 5310-01-352-9577

Category	Code	Description
Materiel Category and Inventory Manager	T	Industrial Supplies (DLA/GSA Items)
Appropriation and Budget Activity	2	Stock Fund Secondary Items
Management Inventory Segment	2	NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable.
Specific Group/Generic Code	0	Medical Materiel
Weapons Systems/End Item or Homogeneous Group	00	DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements Code	X	Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.
Source of Supply	SMS	Defense Logistics Agency Enterprise Business Systems
Agency	DA	Department of the Army
Service Organization	A	U.S. Army
Reparability	Z	This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item.
Acquisition Advice Codes	D	DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item Code	U	UNCLASSIFIED
Shelf Life Code	0	Nondeteriorative
Purchasing	QTY UOM	Q EA : Each

Category	Code	Description
Budget Code	9	General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price Validation	N	The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM. The price has not been analyzed or reviewed for accuracy. ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund Code	SF	Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Materiel Management Aggregation Code	SX	SX:AF SICA RESIDUAL MMAC-OC-ALC
Source of Supply	SMS	Defense Logistics Agency Enterprise Business Systems
Agency	DF	Department of the Air Force
Service Organization	F	U.S. Air Force
Reparability	N	Stock Fund (except Munitions)
Acquisition Advice Codes	D	DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item Code	U	UNCLASSIFIED
Shelf Life Code	0	Nondeteriorative
Purchasing	QTY UOM	Q EA : Each

Category	Code	Description
Stores Account Code	1	Marine Corps Stock Fund Account Item.
Combat Essentiality Code	2	Non-Critical Repair Part. Repair parts or major components whose failure in an end item will not render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency, and which do not fit the definition of Code 3 or 4 items.
Materiel Management Code	B	All CommoditiesDefense Logistics Agency, (DLA,)
Echelon Management Code	2	ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled.
Source of Supply	SMS	Defense Logistics Agency Enterprise Business Systems
Agency	DM	U.S. Marine Corps
Service Organization	M	U.S. Marine Corps
Reparability	Z	Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code.
Acquisition Advice Codes	D	DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item Code	U	UNCLASSIFIED
Shelf Life Code	0	Nondeteriorative
Purchasing	QTY UOM	Q EA : Each

Category	Code	Description
Cognizance Codes	9B	Navy-owned stocks of DLA material Naval Inventory Control Point, Mechanicsburg
Special Material Content	9	Non-Hazardous or Non-Sensitive Item, does not require hazardous or special handling, packaging or precautions
Source of Supply	SMS	Defense Logistics Agency Enterprise Business Systems
Agency	DN	Department of the Navy
Service Organization	N	U.S. Navy
Acquisition Advice Codes	D	DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item Code	U	UNCLASSIFIED
Shelf Life Code	0	Nondeteriorative
Purchasing	QTY UOM	Q EA : Each