NSN 5310-01-473-3688 124-4322644 PC 44, 1244322644PC44, 124-4322648 PC 17

5310-01-473-3688 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Part Alternates: 124-4322644 PC 44, 1244322644PC44, 124-4322648 PC 17, 1244322648PC17, 124-4322649 PC 30, 1244322649PC30, 124-4322651 PC 17, 1244322651PC17, 124-4322652 PC 17, 1244322652PC17, 124-4365872 PC 23, 1244365872PC23, 124-4366739 PC 25, 1244366739PC25, 124-4399311 PC 22, 1244399311PC22, 124-4639027 PC 17, 1244639027PC17, 124-5588671 PC 43, 1245588671PC43, 124-5589896 PC 22, 1245589896PC22, 124-5589897 PC 17, 1245589897PC17, 124-5589899 PC 46, 1245589899PC46, 124-6293626 PC 23, 1246293626PC23, 1-33/64ID X 2-1 /2OD X 1/8THK, 13364IDX212ODX18THK, 4322648, 4639027, 5310-01-473-3688, 01-473-3688, 5310014733688, 014733688

Hardware and Abrasives | Nuts and Washers