NSN 5310-01-483-5528 FFW92TYAGR1CLB, 1.000ODX0.562ID X0.078THK CRES, 1000ODX0562IDX0078THKCRES

5310-01-483-5528 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Part Alternates: FFW92TYAGR1CLB, 1.000ODX0.562ID X0.078THK CRES, 1000ODX0562IDX0078THKCRES, 708-5486672 ITEM 12, 7085486672ITEM12, 709-5343924 ITE, 7095343924ITE, 709-5343928 ITE, 7095343928ITE, 709-5343962 ITE, 7095343962ITE, 709-5343972 ITE, 7095343972ITE, 709-5343974 ITE, 7095343974ITE, 709-5486669 ITE, 7095486669ITE, 5310-01-483-5528, 01-483-5528, 5310014835528, 014835528

Hardware and Abrasives | Nuts and Washers