NSN 5310-12-172-6828 A17DIN125A4, A17DIN125-A4, A17DIN125A470

5310-12-172-6828 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Part Alternates: A17DIN125A4, A17DIN125-A4, A17DIN125A470, A17DIN125-A4-70, N 3502 430 X, N3502430X, C940812 POS 5, C940812POS5, C940900 POS 81, C940900POS81, C940948 POS 81, C940948POS81, C940949 POS 81, C940949POS81, C940950 POS 81, C940950POS81, C940951 POS 81, C940951POS81, C940953 POS 81, C940953POS81, C940954 POS 81, C940954POS81, C940958 POS 81, C940958POS81, D125A170R865, D125-A170-R865, DIN125A17140HVA4, DIN125-A17-140HV-A4, DIN125A17A470, DIN125-A17-A4-70, 426010, 01.0455.54, 01045554, 101286, 2.72-31560 ITEM 1447, 27231560ITEM1447, 395.04.0059, 5310-12-172-6828, 12-172-6828, 5310121726828, 395040059, 121726828

Hardware and Abrasives | Nuts and Washers