Product Details | PACKING WITH RETAINER

5330-00-494-7604 An item composed of a compressible nonmetallic ring which may be loosely fitted into a noncompressible retaining ring, or may be of one piece construction with the compressible ring molded and/or mechanically connected to the retainer. It is specifically designed to form a fluid tight seal when compressed by a packing nut, gland, etc., between fixed surfaces and a cylindrical item passing through it. Excludes SEAL, PLAIN, ENCASED.

Part Alternates: 600-501-5-16, 5330-00-494-7604, 00-494-7604, 5330004947604, 600501516, 004947604

Hardware and Abrasives | Packing and Gasket Materials

Supply Group (FSG) NSN Assign. NIIN
53 27 FEB 1970 00-494-7604

Cross Reference | NSN 5330-00-494-7604

Part Number Cage Code Manufacturer
600-501-5-16 83259 PARKER-HANNIFIN CORPORATION DBA COMPOSITE SEALING SYSTEMS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5330-00-494-7604

Technical Data | NSN 5330-00-494-7604

Characteristic Specifications
MATERIAL RUBBER SYNTHETIC PACKING STEEL RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION COMPOUND NO. N602-7,FSCM 83259 MFR REF SINGLE MATERIAL RESPONSE PACKING QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE RETAINER
SURFACE TREATMENT CADMIUM RETAINER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE RETAINER
CONSTRUCTION ONE-PIECE
OUTSIDE DIAMETER 0.590 INCHES MINIMUM AND 0.613 INCHES MAXIMUM
PACKING INSIDE DIAMETER 0.291 INCHES MINIMUM AND 0.311 INCHES MAXIMUM
RETAINER THICKNESS 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
PACKING RING CROSS-SECTIONAL DIAMETER 0.067 INCHES MINIMUM AND 0.077 INCHES MAXIMUM
MANUFACTURERS CODE 83259
DESIGN CONTROL REFERENCE 600-501-5-16

Restrictions/Controls & Freight Information | NSN 5330-00-494-7604

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 095190 HARDWARE, NOI SUB 9
Less than car load rating Q 70
Less than truck load rating Q 70.0
Water commodity Code 713 unknown
Originating Activity Code SE San Antonio Air Logistics Center
Kelly AFB, TX 78241-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity B Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable