Product Details | NONMETALLIC STRIP SEAL

5330-00-608-0290 An item fabricated from nonmetallic material designed to be used where there is no relative motion between joined parts. Items having a square or rectangular cross section must be a single piece whose ends may have been secured together to form a specific shape. It may be formed to a specific shape, except round, with or without joints. It may have fabric, cord or metal reinforcement. Except for molded corners, end cuts, and mounting facilities such as holes, slots, press-fit buttons, or the like, the item must be of one continuous cross section. For straight items with square end cuts and without mounting holes, slots or press-fit buttons see RUBBER STRIP. For items with round cross sections see SEAL, NONMETALLIC ROUND SECTION. Excludes GASKET and PACKING, PREFORMED.

Part Alternates: 7443149P3, 5330-00-608-0290, 00-608-0290, 5330006080290, 006080290

Hardware and Abrasives | Packing and Gasket Materials

Supply Group (FSG) NSN Assign. NIIN
53 01 JAN 1963 00-608-0290

Drawings & Photos | NSN 5330-00-608-0290


Cross Reference | NSN 5330-00-608-0290

Part Number Cage Code Manufacturer
7443149P3 24446 GENERAL ELECTRIC CO
7443149P3 24454 GENERAL ELECTRIC CO ELECTRONIC COMPONENTS DIVISION OF

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5330-00-608-0290

Technical Data | NSN 5330-00-608-0290

Characteristic Specifications
MATERIAL RUBBER CHLOROPRENE CLASS CR OVERALL
CONSTRUCTION SOLID
CROSS-SECTIONAL SHAPE STYLE G3 RECTANGULAR
CROSS-SECTIONAL HEIGHT 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM
CROSS-SECTIONAL WIDTH 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM
FABRICATION METHOD CELLULAR, UNEXPLODED
STYLE DESIGNATOR A12 STRIP
OVERALL LENGTH 27.990 INCHES MINIMUM AND 28.490 INCHES MAXIMUM
END CUT LENGTH 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM
END CUT DEPTH 0.156 INCHES MINIMUM AND 0.218 INCHES MAXIMUM
III SMOOTH FINISH SURFACE LOCATION BOTTOM AND TOP
MANUFACTURERS CODE 24446
DESIGN CONTROL REFERENCE 7443149P3

Restrictions/Controls & Freight Information | NSN 5330-00-608-0290

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 194120 WASHERS/GASKETS/PCKG DVCS NOI
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 596 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity B Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable