Product Details | NONMETALLIC STRIP SEAL

5330-01-133-4892 An item fabricated from nonmetallic material designed to be used where there is no relative motion between joined parts. Items having a square or rectangular cross section must be a single piece whose ends may have been secured together to form a specific shape. It may be formed to a specific shape, except round, with or without joints. It may have fabric, cord or metal reinforcement. Except for molded corners, end cuts, and mounting facilities such as holes, slots, press-fit buttons, or the like, the item must be of one continuous cross section. For straight items with square end cuts and without mounting holes, slots or press-fit buttons see RUBBER STRIP. For items with round cross sections see SEAL, NONMETALLIC ROUND SECTION. Excludes GASKET and PACKING, PREFORMED.

Part Alternates: 1592303 PIECE 2, 15923032, 1592303-2, 1592303PIECE2, 5330-01-133-4892, 01-133-4892, 5330011334892, 011334892

Hardware and Abrasives | Packing and Gasket Materials

Supply Group (FSG) NSN Assign. NIIN
53 15 JUN 1982 01-133-4892

Drawings & Photos | NSN 5330-01-133-4892


Cross Reference | NSN 5330-01-133-4892

Part Number Cage Code Manufacturer
1592303 PIECE 2 10001 NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT
1592303-2 D9182 BOSCH REXROTH GMBH LOHMANN +STOLTERFOHT

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5330-01-133-4892

Technical Data | NSN 5330-01-133-4892

Characteristic Specifications
MATERIAL RUBBER CHLOROPRENE CLASS CR OVERALL
CONSTRUCTION SOLID
CROSS-SECTIONAL SHAPE STYLE G3 RECTANGULAR
CROSS-SECTIONAL HEIGHT 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
CROSS-SECTIONAL WIDTH 0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
FABRICATION METHOD SOLID
STYLE DESIGNATOR A8 STRIP
OVERALL LENGTH 185.187 INCHES MINIMUM AND 186.187 INCHES MAXIMUM
END CUT ANGLE 35.0 DEGREES AND 55.0 DEGREES

Restrictions/Controls & Freight Information | NSN 5330-01-133-4892

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 194120 WASHERS/GASKETS/PCKG DVCS NOI
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 596 unknown
Originating Activity Code KZ Defense Supply Center Philadelphia
Philadelphia, PA 19101
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity B Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5330-01-133-4892

Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each