NSN 5330-01-245-2615 7832651, 783265-1, 01-245-2615
Product Details | NONMETALLIC ROUND SECTION SEAL
5330-01-245-2615 An item fabricated from nonmetallic material designed to be used where there is no relative motion between joined parts. Items with a solid cross section must be a single piece whose ends may have been secured together to form a specific shape. It may be formed to specific shape with or without joints. It may be a straight item of a specific length with end cuts or joints. It may have a solid or tubular cross section. Except for molded corners, end cuts, and mounting facilities such as mounting holes, slots, press-fit buttons, or the like, the item must be of one continuous round cross section. It may have fabric, cord or metal reinforcement. For straight items with square end cuts and without mounting holes, slots or press-fit buttons see RUBBER ROUND SECTION and TUBING, NONMETALLIC. Excludes GASKET and PACKING, PREFORMED.
Part Alternates: 7832651, 783265-1, 5330-01-245-2615, 01-245-2615, 5330012452615, 012452615
Hardware and Abrasives | Packing and Gasket Materials
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 26 NOV 1986 | 01-245-2615 | 36873 ( SEAL, NONMETALLIC ROUND SECTION ) |
Drawings & Photos | NSN 5330-01-245-2615
Demand History | NSN 5330-01-245-2615
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| 5330-01-245-2615 | 2020-02-52 | 18 | United States |
| 5330-01-245-2615 | 2020-02-52 | 18 | United States |
| 5330-01-245-2615 | 2011-06-181 | 222 | DIBBS |
| 5330-01-245-2615 | 2010-06-177 | 535 | DIBBS |
| 5330-01-245-2615 | 2010-04-117 | 62 | DIBBS |
| 5330-01-245-2615 | 2009-10-280 | 393 | DIBBS |
| 5330-01-245-2615 | 2009-10-278 | 430 | DIBBS |
| 5330-01-245-2615 | 2009-09-257 | 173 | DIBBS |
| 5330-01-245-2615 | 2009-09-244 | 145 | DIBBS |
| 5330-01-245-2615 | 2009-07-205 | 33 | DIBBS |
| 5330-01-245-2615 | 2009-07-202 | 66 | DIBBS |
| 5330-01-245-2615 | 2009-05-151 | 46 | DIBBS |
| 5330-01-245-2615 | 2009-04-105 | 61 | DIBBS |
| 5330-01-245-2615 | 2009-01-07 | 164 | DIBBS |
| 5330-01-245-2615 | 2008-12-358 | 139 | DIBBS |
| 5330-01-245-2615 | 2008-12-354 | 22 | DIBBS |
| 5330-01-245-2615 | 2008-11-319 | 292 | DIBBS |
| 5330-01-245-2615 | 2008-08-224 | 221 | DIBBS |
| 5330-01-245-2615 | 2008-06-168 | 104 | DIBBS |
| 5330-01-245-2615 | 2008-05-129 | 89 | DIBBS |
| 5330-01-245-2615 | 2008-04-109 | 93 | DIBBS |
Cross Reference | NSN 5330-01-245-2615
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 783265-1 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5330-01-245-2615
Technical Data | NSN 5330-01-245-2615
| Characteristic | Specifications |
|---|---|
| MATERIAL | RUBBER FLUOROSILICONE CLASS FQ OVERALL |
| CONSTRUCTION | SOLID |
| CROSS-SECTIONAL SHAPE STYLE | G1 CIRCULAR |
| CROSS SECTION OUTSIDE DIAMETER | 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM |
| STYLE DESIGNATOR | A4E NON-CIRCULAR |
| INSIDE CORNER RADIUS | 0.090 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| OUTSIDE CORNER RADIUS | 0.090 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| APERTURE WIDTH | 15.980 INCHES MINIMUM AND 16.060 INCHES MAXIMUM |
| APERTURE LENGTH | 8.670 INCHES MINIMUM AND 8.750 INCHES MAXIMUM |
Restrictions/Controls & Freight Information | NSN 5330-01-245-2615
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| NMF Description | 194090 | WASHERS/SEALS |
| Less than car load rating | P | 77.5 |
| Less than truck load rating | S | 60.0 |
| Water commodity Code | 596 | unknown |
| Originating Activity Code | SE | San Antonio Air Logistics Center Kelly AFB, TX 78241-5000 |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | B | Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | Z | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 5330-01-245-2615
Air Force| Category | Code | Description |
|---|---|---|
| Budget Code | 9 | General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors. |
| Price Validation | N | The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
|
| Materiel Management Aggregation Code | NZ | SX:PRATT & WHITNEY JET ENGINES & COMPONENTS, F-100–P-100 |
| Fund Code | SF | Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point. |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DF | Department of the Air Force |
| Service Organization | F | U.S. Air Force |
| Reparability | N | Stock Fund (except Munitions) |
| Acquisition Advice Codes | D | DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |