Product Details | NONMETALLIC ANGLE SEAL

5330-01-300-8653 An item fabricated from NONMETALLIC ANGLE. It may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. Items except for molded corners, end cut(s), and mounting hole(s), slot(s), press fit buttons and the like, must be of one continuous cross section. It may have fabric, cord, or metal reinforcement. It is specifically designed for use in applications where there is no relative motion between joined parts. Excludes BUSHING, NONMETALLIC; GASKET; and PACKING PREFORMED. For straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see NONMETALLIC ANGLE.

Part Alternates: LS5398, 5330-01-300-8653, 01-300-8653, 5330013008653, 013008653

Hardware and Abrasives | Packing and Gasket Materials

Supply Group (FSG) NSN Assign. NIIN
53 19 MAY 1989 01-300-8653

Demand History | NSN 5330-01-300-8653

Part Number Request Date QTY Origin
5330-01-300-8653 2025-03-72 229 DIBBS
5330-01-300-8653 2024-12-344 376 DIBBS
5330-01-300-8653 2024-02-60 412 DIBBS
5330-01-300-8653 2024-02-36 348 DIBBS
5330-01-300-8653 2023-05-136 302 DIBBS
LS5398 2021-09-273 876 Malaysia
5330-01-300-8653 2020-10-282 922 DIBBS
5330-01-300-8653 2020-09-274 404 DIBBS
5330-01-300-8653 2020-09-254 96 DIBBS
5330-01-300-8653 2020-07-203 72 DIBBS
5330-01-300-8653 2020-06-160 738 DIBBS
5330-01-300-8653 2020-05-141 267 DIBBS
5330-01-300-8653 2020-03-85 296 DIBBS
5330-01-300-8653 2019-02-38 512 DIBBS
LS5398 2018-04-108 10 United Arab Emirates
5330-01-300-8653 2018-04-100 417 DIBBS
LS5398 2017-12-361 3 United States
5330-01-300-8653 2017-10-299 586 DIBBS
LS5398 2017-10-292 40 United States
5330-01-300-8653 2016-09-262 682 DIBBS
5330-01-300-8653 2016-01-10 470 DIBBS
5330-01-300-8653 2015-08-235 402 DIBBS
5330-01-300-8653 2015-05-148 414 DIBBS
5330-01-300-8653 2014-11-310 300 United States
5330-01-300-8653 2014-08-216 800 DIBBS
5330-01-300-8653 2013-02-50 1000 DIBBS
5330-01-300-8653 2013-02-50 359 DIBBS
5330-01-300-8653 2012-11-325 496 DIBBS
5330-01-300-8653 2012-11-313 340 DIBBS
5330-01-300-8653 2012-09-268 1000 DIBBS
LS5398 2012-08-243 3 United States
5330-01-300-8653 2012-05-142 319 DIBBS
5330-01-300-8653 2012-01-26 316 DIBBS
5330-01-300-8653 2011-11-320 450 DIBBS
5330-01-300-8653 2011-10-293 301 DIBBS
5330-01-300-8653 2011-06-171 600 DIBBS
5330-01-300-8653 2011-03-67 184 DIBBS
5330-01-300-8653 2010-12-354 175 DIBBS
5330-01-300-8653 2010-11-305 250 DIBBS
5330-01-300-8653 2010-03-78 355 DIBBS
5330-01-300-8653 2010-02-40 334 DIBBS
5330-01-300-8653 2009-12-342 206 DIBBS
5330-01-300-8653 2009-10-296 245 DIBBS
5330-01-300-8653 2009-10-288 167 DIBBS
5330-01-300-8653 2009-08-233 223 DIBBS
5330-01-300-8653 2009-06-173 550 DIBBS
5330-01-300-8653 2009-04-105 146 DIBBS
5330-01-300-8653 2008-02-46 518 DIBBS
5330-01-300-8653 2008-01-31 518 DIBBS

Cross Reference | NSN 5330-01-300-8653

Part Number Cage Code Manufacturer
LS5398 75345 KIRKHILL-TA CO.
LS5398 98897 LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN AERONAUTICS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5330-01-300-8653

Technical Data | NSN 5330-01-300-8653

Characteristic Specifications
MATERIAL RUBBER OVERALL
CONSTRUCTION ONE-PIECE
SPECIAL FEATURES 10FT LENGTHS
MANUFACTURERS CODE 98897
DESIGN CONTROL REFERENCE LS5398

Restrictions/Controls & Freight Information | NSN 5330-01-300-8653

Category Code Description
Shelf-Life Code:960 months
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 194120 WASHERS/GASKETS/PCKG DVCS NOI SUB8
Less than car load rating P 77.5
Less than truck load rating M 85.0
Water commodity Code 596 unknown
Originating Activity Code TG Warner-Robins Air Logistics Center
Robins AFB, GA 31098-5609
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Z No special handling required.
Special Handling Code Z unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5330-01-300-8653

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeLGTG:C-130 HERCULES
Price ValidationP The current standard price is the initial negotiated provisioned price.
  • This is the price paid by DoD for the item as the result of price negotiation of the Provisioned Item Order (PIO) or other initial negotiated price.
  • ZOP or Standard Price challenges are permissible but should be supported with adequate justification.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code960 months
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code960 months
Purchasing QTY
UOM
1
EA : Each