NSN 5330-01-346-5345 1369AS1521, 1369AS152-1, 01-346-5345
Product Details | NONMETALLIC ANGLE SEAL
5330-01-346-5345 An item fabricated from NONMETALLIC ANGLE. It may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. Items except for molded corners, end cut(s), and mounting hole(s), slot(s), press fit buttons and the like, must be of one continuous cross section. It may have fabric, cord, or metal reinforcement. It is specifically designed for use in applications where there is no relative motion between joined parts. Excludes BUSHING, NONMETALLIC; GASKET; and PACKING PREFORMED. For straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see NONMETALLIC ANGLE.
Part Alternates: 1369AS1521, 1369AS152-1, 5330-01-346-5345, 01-346-5345, 5330013465345, 013465345
Hardware and Abrasives | Packing and Gasket Materials
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 08 OCT 1991 | 01-346-5345 | 32845 ( SEAL, NONMETALLIC ANGLE ) |
Drawings & Photos | NSN 5330-01-346-5345
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5330-01-346-5345
Technical Data | NSN 5330-01-346-5345
| Characteristic | Specifications |
|---|---|
| CROSS-SECTIONAL SHAPE STYLE | J1 L SHAPE |
| RIGHT/BASE FLANGE HEIGHT | 11.430 INCHES NOMINAL |
| LEFT FLANGE HEIGHT | 15.310 INCHES NOMINAL |
| LEFT FLANGE THICKNESS AT TOE | 0.620 INCHES NOMINAL |
| RIGHT/BASE FLANGE THICKNESS AT TOE | 0.620 INCHES NOMINAL |
| RIGHT/BASE FLANGE THICKNESS AT HEEL | 0.620 INCHES NOMINAL |
| LEFT FLANGE THICKNESS AT HEEL | 0.620 INCHES NOMINAL |
| INSIDE ANGLE | 45.0 DEGREES NOMINAL |
| STYLE DESIGNATOR | A4A NON-CIRCULAR |
| APERTURE WIDTH | 9.840 INCHES NOMINAL |
| APERTURE LENGTH | 13.730 INCHES NOMINAL |
| LEFT TIP STYLE | J1A SQUARE END |
| RIGHT TIP RELATIONSHIP WITH LEFT TIP | IDENTICAL |
| SPECIAL FEATURES | SKIN IS MADE OF SYNTHETIC RUBBER PER MIL-R-6853,CL II,GD 40,INSERT IS MADE OF STEEL PER ASTM A 569-72 |
| III END ITEM IDENTIFICATION | GROUND AND AIRBORNE GAS TURBINE ENGINES,AUXILIARY POWER UNITS ACCESSORIES AND PARTS |
| MANUFACTURERS CODE | 30003 |
| DESIGN CONTROL REFERENCE | 1369AS152-1 |
Restrictions/Controls & Freight Information | NSN 5330-01-346-5345
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| NMF Description | 194120 | WASHERS/GASKETS/PCKG DVCS NOI SUB9 |
| Less than car load rating | ||
| Less than truck load rating | Q | 70.0 |
| Water commodity Code | 713 | unknown |
| Originating Activity Code | KE | Naval ICP Philadelphia, PA 19111 |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | B | Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 5330-01-346-5345
Navy| Category | Code | Description |
|---|---|---|
| Cognizance Codes | 9B | Navy-owned stocks of DLA material Naval Inventory Control Point, Mechanicsburg |
| Special Material ID | RX | Ground and airborne gas turbine engines, auxiliary power units accessories and parts. |
| Special Material Content | 9 | Non-Hazardous or Non-Sensitive Item, does not require hazardous or special handling, packaging or precautions |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DN | Department of the Navy |
| Service Organization | N | U.S. Navy |
| Acquisition Advice Codes | Z | INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |