Product Details | PACKING WITH RETAINER

5330-01-356-6646 An item composed of a compressible nonmetallic ring which may be loosely fitted into a noncompressible retaining ring, or may be of one piece construction with the compressible ring molded and/or mechanically connected to the retainer. It is specifically designed to form a fluid tight seal when compressed by a packing nut, gland, etc., between fixed surfaces and a cylindrical item passing through it. Excludes SEAL, PLAIN, ENCASED.

Part Alternates: B33872220, B33872-220, S38190220, S38190-220, 5330-01-356-6646, 01-356-6646, 5330013566646, 013566646

Hardware and Abrasives | Packing and Gasket Materials

Supply Group (FSG) NSN Assign. NIIN
53 08 APR 1992 01-356-6646

Cross Reference | NSN 5330-01-356-6646

Part Number Cage Code Manufacturer
B33872-220 94697 MOOG, INC.
S38190-220 09257 TRELLEBORG SEALING SOLUTIONS US, INC.
S38190-220 97820 SHAMBAN POLYMER TECH GROUP

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5330-01-356-6646

Technical Data | NSN 5330-01-356-6646

Characteristic Specifications
MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR PACKING PLASTIC POLYTETRAFLUOROETHYLENE RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION MIL-P-83461 MIL SPEC SINGLE MATERIAL RESPONSE PACKING
CONSTRUCTION TWO-PIECE
PACKING INSIDE DIAMETER 1.347 INCHES MINIMUM AND 1.371 INCHES MAXIMUM
RETAINER THICKNESS 0.304 INCHES MINIMUM AND 0.314 INCHES MAXIMUM
PACKING RING THICKNESS 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM

Restrictions/Controls & Freight Information | NSN 5330-01-356-6646

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information

Management | NSN 5330-01-356-6646

Category Code Description
Materiel Management Aggregation CodeBQTN:B-2 TSSP, NORTHROP GRUMMAN
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Budget CodeS 1557X3010:Aircraft Replenishment Spares
Source of SupplyF59Northrop Grumman IS ACS
2501 Liberty Parkway, Suite 101
Midwest, OK 73110-2885
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesVTERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative