Product Details | NONMETALLIC SPECIAL SHAPED SECTION SEAL

5330-01-387-0429 An item fabricated from NONMETALLIC SPECIAL SHAPED SECTION. It may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. Items, except for molded corners, slot(s), press fit buttons, and the like must be of one continuous cross section. It is specifically designed for use in applications where there is no relative motion between joined parts. Excludes BUSHING, NONMETALLIC; PACKING, PERFORMED; PAD, CUSHIONING;and SEAL, PLAIN. For straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see NONMETALLIC SPECIAL SHAPED SECTION.

Part Alternates: 123B348H01, 5330-01-387-0429, 01-387-0429, 5330013870429, 013870429

Hardware and Abrasives | Packing and Gasket Materials

Supply Group (FSG) NSN Assign. NIIN
53 24 FEB 1994 01-387-0429

Cross Reference | NSN 5330-01-387-0429

Part Number Cage Code Manufacturer
123B348H01 77969 RUBBERCRAFT CORPORATION OF CALIFORNIA, LTD
123B348H01 97942 NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN SYSTEMS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5330-01-387-0429

Technical Data | NSN 5330-01-387-0429

Characteristic Specifications
MATERIAL RUBBER CHLOROPRENE CLASS CR OVERALL
HARDNESS RATING 40.0 ROCKWELL A NOMINAL OVERALL
CONSTRUCTION SOLID
SPECIAL FEATURES MATERIAL IS MADE TO MIL-R-3065, GR SC 410 A1B1C1E3F2. THIS SEAL IS 18.50 INCHES LONG PLUS OR MINUS .06. IT IS.31 INCHES THICK AND .81 INCHES WIDE. ITS CROSSSECTION IS SIMILAR TO DRAWINGGROUP H NUMBER 16 EXCEPT IT HAS TWO(2)FLATS.
III END ITEM IDENTIFICATION INVERTER POWER MODULE ASSY

Restrictions/Controls & Freight Information | NSN 5330-01-387-0429

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 194120 WASHERS/GASKETS/PCKG DVCS NOI SUB6
Less than car load rating J 100.2
Less than truck load rating J 100.2
Water commodity Code 772 unknown
Originating Activity Code TK HQ AFMC/GLSC 401 SCM/GUMB
Wright-Patterson AFB, OH 45433-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable