NSN 5330-01-557-7603 CR597308, 597308, 01-557-7603
Product Details | PLAIN SEAL
5330-01-557-7603 A pliable rubber or composition ring-shaped element, split or jointless (solid) not encased in a metal shell, but having a spring, spreader and/or molded-in reinforcement. It is designed to be pressmounted between fixed and movable or moving parts to form a tight and effective seal.
Part Alternates: CR597308, 597308, 5330-01-557-7603, 01-557-7603, 5330015577603, 015577603
Hardware and Abrasives | Packing and Gasket Materials
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 27 OCT 2007 | 01-557-7603 | 04250 ( SEAL, PLAIN ) |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5330-01-557-7603
Technical Data | NSN 5330-01-557-7603
| Characteristic | Specifications |
|---|---|
| SEAL WIDTH | 1.125 INCHES NOMINAL |
| HOUSING BORE DIAMETER | 0.937 INCHES NOMINAL |
| SPECIAL FEATURES | SKF AXIAL CLAMP SEALS ARE PRODUCED IN THREE DIFFERENT DESIGNS:CT1, CT3, AND CT4 DESIGN; THESE AXIAL CLAMP SEALS ARE MADE OF APPROPRIATELY PROFILED STRIPS OF NON-REINFORCED NITRILE RUBBER WHICH ARE HELD FIRMLY IN PLACE BY STAINLESS STEEL SCREW-TYPE CLAMPS; THEY ARE AVAILABLE IN THE DIAMETER RANGE 150 TO 4600 MM; THE SEALS DO NOT ROTATE BUT SEAL AXIALLY AGAINST A ROTATING COUNTERFACE; CT3 DESIGN:THE SEALS OF THE CT3 DESIGN DIFFER FROM THOSE OF THE CT1 DESIGN ONLY IN THE FORM OF THE SEALING LIP; THIS IS AGAIN FLAT BUT IS PROVIDED WITH ANNULAR GROOVES; THESE SERVE TO TRAP CONTAMINANTS WHICH MAY HAVE STARTED TO PENETRATE THE LIP/COUNTERFACE CONTACT; THE MAXIMUM OPERATING INTERFERENCE FOR THESE SEALS IS +4,8 MM; SHAFT:42.500 IN.; OD:43.688 IN.; WEIGHT:4.250 LBS |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | AXIAL CLAMP SEALS CT3 DESIGN |
Restrictions/Controls & Freight Information | NSN 5330-01-557-7603
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Electro-static Discharge Susceptible: | A | No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||