NSN 5340-00-073-5038 00-073-5038, 000735038
Product Details | DOUBLE ANGLE BRACKET
5340-00-073-5038 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.202534000005342000000
Part Alternates: 5340-00-073-5038, 00-073-5038, 5340000735038, 000735038
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 00-073-5038 | 20354 ( BRACKET, DOUBLE ANGLE ) |
Drawings & Photos | NSN 5340-00-073-5038
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5340-00-073-5038
Technical Data | NSN 5340-00-073-5038
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 440F OR STEEL COMP 1020 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698 COND 2 FED STD ALL MATERIAL RESPONSES |
| STYLE DESIGNATOR | 11 DOUBLE ANGLE |
| III FIRST LEG LENGTH | 1.214 INCHES MINIMUM AND 1.224 INCHES MAXIMUM |
| III SECOND LEG LENGTH | 0.804 INCHES MINIMUM AND 0.814 INCHES MAXIMUM |
| III FIRST LEG THICKNESS | 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| III SECOND LEG THICKNESS | 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| III CENTER SECTION HEIGHT | 2.370 INCHES MINIMUM AND 2.380 INCHES MAXIMUM |
| III CENTER SECTION WIDTH | 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| III CENTER SECTION THICKNESS | 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| III FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| III SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG STYLE | 104 SQUARE |
| FIRST LEG WIDTH | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | 132 ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.2869 INCHES MINIMUM AND 0.3069 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | 104 SQUARE |
| SECOND LEG WIDTH | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | 136 TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.166 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.171 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM |
| (NON-CORE DATA) FABRICATION METHOD | STAMPED |
| MANUFACTURERS CODE | 18876 |
| DESIGN CONTROL REFERENCE | 8518997 |
Restrictions/Controls & Freight Information | NSN 5340-00-073-5038
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||