NSN 5340-00-304-5385 AWSR3242, 00-304-5385, 003045385
Product Details | DOUBLE ANGLE BRACKET
5340-00-304-5385 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.202534000005342000000
Part Alternates: AWSR3242, 5340-00-304-5385, 00-304-5385, 5340003045385, 003045385
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 01 JAN 1963 | 00-304-5385 | 20354 ( BRACKET, DOUBLE ANGLE ) |
Drawings & Photos | NSN 5340-00-304-5385
Cross Reference | NSN 5340-00-304-5385
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| AWSR3242 | 21757 | FEDERAL INDUSTRIES, INC. |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5340-00-304-5385
Technical Data | NSN 5340-00-304-5385
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 1040 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-635 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE TREATMENT | CADMIUM |
| STYLE DESIGNATOR | 11 DOUBLE ANGLE |
| III FIRST LEG LENGTH | 1.240 INCHES NOMINAL |
| III SECOND LEG LENGTH | 1.310 INCHES NOMINAL |
| III FIRST LEG THICKNESS | 0.125 INCHES NOMINAL |
| III SECOND LEG THICKNESS | 1.120 INCHES NOMINAL |
| III CENTER SECTION HEIGHT | 1.120 INCHES NOMINAL |
| III CENTER SECTION WIDTH | 1.500 INCHES NOMINAL |
| III CENTER SECTION THICKNESS | 0.125 INCHES NOMINAL |
| III FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| III SECOND LEG ANGLE | 25.5 DEGREES NOMINAL |
| FIRST LEG STYLE | 104 |
| FIRST LEG WIDTH | 1.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 132 |
| FIRST LEG HOLE DIAMETER | 0.375 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.750 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.620 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | 102 |
| SECOND LEG WIDTH | 1.500 INCHES NOMINAL |
| SECOND LEG END RADIUS | 0.750 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 132 |
| SECOND LEG HOLE DIAMETER | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.750 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.750 INCHES NOMINAL |
| REINFORCEMENT METHOD | GUSSET BOTH SIDES |
| (NON-CORE DATA) FABRICATION METHOD | WELDED |
| III HEAT TREATMENT | NORMALIZED |
| MANUFACTURERS CODE | 21757 |
| DESIGN CONTROL REFERENCE | AWSR3242 |
Restrictions/Controls & Freight Information | NSN 5340-00-304-5385
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | B | Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.) |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||