NSN 5340-00-482-4836 10931096, 00-482-4836, 004824836
Product Details | DOUBLE ANGLE BRACKET
5340-00-482-4836 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.202534000005342000000
Part Alternates: 10931096, 5340-00-482-4836, 00-482-4836, 5340004824836, 004824836
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 17 MAR 1972 | 00-482-4836 | 20354 ( BRACKET, DOUBLE ANGLE ) |
Drawings & Photos | NSN 5340-00-482-4836
Cross Reference | NSN 5340-00-482-4836
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 10931096 | 19204 | ARMY UNITED STATES DEPARTMENT OF THE |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5340-00-482-4836
Technical Data | NSN 5340-00-482-4836
| Characteristic | Specifications |
|---|---|
| MATERIAL | ALUMINUM ALLOY 6061 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/11 0 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-200/8 0 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE TREATMENT | ENAMEL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-E-489 FED SPEC SINGLE TREATMENT RESPONSE |
| STYLE DESIGNATOR | 11 DOUBLE ANGLE |
| III FIRST LEG LENGTH | 1.160 INCHES NOMINAL |
| III SECOND LEG LENGTH | 1.340 INCHES NOMINAL |
| III FIRST LEG THICKNESS | 0.190 INCHES NOMINAL |
| III SECOND LEG THICKNESS | 0.190 INCHES NOMINAL |
| III CENTER SECTION HEIGHT | 2.190 INCHES NOMINAL |
| III CENTER SECTION WIDTH | 0.750 INCHES NOMINAL |
| III CENTER SECTION THICKNESS | 0.190 INCHES NOMINAL |
| III FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| III SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG STYLE | 104 SQUARE |
| FIRST LEG WIDTH | 0.750 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 146 ONE SLOT |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.380 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.410 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.500 INCHES NOMINAL |
| FIRST LEG SLOT WIDTH | 0.280 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | 104 SQUARE |
| SECOND LEG WIDTH | 0.750 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 146 ONE SLOT |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.380 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.470 INCHES NOMINAL |
| SECOND LEG SLOT LENGTH | 0.620 INCHES NOMINAL |
| SECOND LEG SLOT WIDTH | 0.410 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| (NON-CORE DATA) FABRICATION METHOD | FORMED |
| III HEAT TREATMENT | T-6 SOLUTION HEAT TREATED |
| MANUFACTURERS CODE | 19204 |
| DESIGN CONTROL REFERENCE | 10931096 |
Restrictions/Controls & Freight Information | NSN 5340-00-482-4836
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||