NSN 5340-00-594-4106 SMB426821, SM-B-426821, 57927
Product Details | DOUBLE ANGLE BRACKET
5340-00-594-4106 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.202534000005342000000
Part Alternates: SMB426821, SM-B-426821, 57927, 5340-00-594-4106, 00-594-4106, 5340005944106, 005944106
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 01 JAN 1963 | 00-594-4106 | 20354 ( BRACKET, DOUBLE ANGLE ) |
Drawings & Photos | NSN 5340-00-594-4106
Cross Reference | NSN 5340-00-594-4106
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
Ernie G.
Honeywell
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
NSNs for Compare ( up to 4 ): Add 5340-00-594-4106
Related Products | NSN 5340-00-594-4106
Technical Data | NSN 5340-00-594-4106
| Characteristic | Specifications |
|---|---|
| MATERIAL | COPPER ALLOY 511 |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B103 ASSN STD SINGLE MATERIAL RESPONSE |
| STYLE DESIGNATOR | 11 DOUBLE ANGLE |
| III FIRST LEG LENGTH | 0.2825 INCHES MINIMUM AND 0.4105 INCHES MAXIMUM |
| III SECOND LEG LENGTH | 0.563 INCHES NOMINAL |
| III FIRST LEG THICKNESS | 0.0605 INCHES MINIMUM AND 0.0675 INCHES MAXIMUM |
| III SECOND LEG THICKNESS | 0.0605 INCHES MINIMUM AND 0.0675 INCHES MAXIMUM |
| III CENTER SECTION HEIGHT | 0.718 INCHES NOMINAL |
| III CENTER SECTION WIDTH | 1.000 INCHES NOMINAL |
| III CENTER SECTION THICKNESS | 0.0605 INCHES MINIMUM AND 0.0675 INCHES MAXIMUM |
| III FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| III SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG STYLE | 105 CORNER RADIUS |
| FIRST LEG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.125 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 131 NO HOLE |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | 105 CORNER RADIUS |
| SECOND LEG WIDTH | 1.100 INCHES NOMINAL |
| SECOND LEG CORNER RADIUS | 0.125 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 143 FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 0.143 INCHES MINIMUM AND 0.145 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH | 0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | 0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.219 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.030 INCHES MINIMUM AND 0.032 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.125 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.125 INCHES NOMINAL |
| MOUNTING HOLE TYPE | PLAIN |
| SPECIAL FEATURES | THREE SLITS IN FIRST LEG; HOLES ADJACENT TO SECOND LEG LG 0.087 IN. MIN 0.091 IN. MAX DIA; ADDITIONAL 0.180 IN. NOM DIA HOLE IN SECOND LEG ON 0.500 IN. CENTERLINE; ONE HOLE 0.093 DJA COUNTERSUNK TO 0.109 IN. DIA ON BOTH SIDES LOCATED ON CENTER SECTION |
Restrictions/Controls & Freight Information | NSN 5340-00-594-4106
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| NMF Description | 093600 | BRACKETS/BUSHINGS/JOINTS/MOUNTS ETC |
| Less than car load rating | ||
| Less than truck load rating | Q | 70.0 |
| Water commodity Code | 713 | unknown |
| Originating Activity Code | XX | |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | B | Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |