NSN 5340-00-806-6957 100PLW6116, 100PLW611-6, 7511853
Product Details | GENERAL PURPOSE RESILIENT MOUNT
5340-00-806-6957 An item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
Part Alternates: 100PLW6116, 100PLW611-6, 7511853, 751185-3, 5340-00-806-6957, 00-806-6957, 5340008066957, 008066957
Hardware and Abrasives | Hardware, Commercial
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
53 | 01 JAN 1963 | 00-806-6957 | 53590 ( MOUNT, RESILIENT, UTILITY ) |
Request a Quote
What Our Customers Say
Compare
NSNs for Compare ( up to 4 ): Add 5340-00-806-6957
Related Products | NSN 5340-00-806-6957
Technical Data | NSN 5340-00-806-6957
Characteristic | Specifications |
---|---|
RESILIENT MEMBER MATERIAL | RUBBER |
NONMETALLIC HARDNESS RATING | NOT RATED |
RIGID MEMBER MATERIAL AND LOCATION | STEEL OVERALL |
STYLE DESIGNATOR | C31 ROUND W/BUSHING FOUR-HOLE FLANGE |
INSIDE DIAMETER | 0.166 INCHES NOMINAL |
FLANGE THICKNESS | 0.032 INCHES NOMINAL |
DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL |
FLANGE LENGTH | 1.250 INCHES NOMINAL |
FLANGE WIDTH | 1.250 INCHES NOMINAL |
DISTANCE FROM FLANGE TO END | 0.300 INCHES NOMINAL |
SHORTEST DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL |
FLANGE MOUNTING HOLE DIAMETER | 0.141 INCHES NOMINAL |
HEIGHT | 0.410 INCHES NOMINAL |
STATIC LOAD RATING AT SPECIFIED DEFLECTION | 3 LB LOAD RATING AT 0.062 IN. DEFLECTION |
MAXIMUM LOAD RATING | NOT RATED |
Restrictions/Controls & Freight Information | NSN 5340-00-806-6957
Category | Code | Description |
---|---|---|
Shelf-Life Code: | 0 | Nondeteriorative |
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
Controlled Inventory Item Code: | U | UNCLASSIFIED |
Precious Metals Indicator Code: | A | Item does not contain precious metal |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
Category | Code | Description |
---|---|---|
No Freight Information |
Management | NSN 5340-00-806-6957
Category | Code | Description |
---|---|---|
Cognizance Codes | 9Z | Navy-owned stocks of defense industrial material Naval Inventory Control Point, Mechanicsburg |
Source of Supply | S9I | Defense Industrial Supply Center Philadelphia, PA 19111 |
Agency | DN | Department of the Navy |
Service Organization | N | U.S. Navy |
Acquisition Advice Codes | V | TERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable. |
Controlled Item Code | U | UNCLASSIFIED |
Shelf Life Code | 0 | Nondeteriorative |
Purchasing | QTY UOM |
1 EA : Each |