NSN 5340-01-066-7577 11678451, 01-066-7577, 010667577
Product Details | DOUBLE ANGLE BRACKET
5340-01-066-7577 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.202534000005342000000
Part Alternates: 11678451, 5340-01-066-7577, 01-066-7577, 5340010667577, 010667577
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 18 OCT 1978 | 01-066-7577 | 20354 ( BRACKET, DOUBLE ANGLE ) |
Drawings & Photos | NSN 5340-01-066-7577
Cross Reference | NSN 5340-01-066-7577
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 11678451 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
Ernie G.
Honeywell
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
NSNs for Compare ( up to 4 ): Add 5340-01-066-7577
Related Products | NSN 5340-01-066-7577
Technical Data | NSN 5340-01-066-7577
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-741 MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE TREATMENT | PRIMER AND ENAMEL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-P-636 MIL SPEC SINGLE TREATMENT RESPONSE AND TT-L-529 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYLE DESIGNATOR | 13 ADJACENT ANGLES |
| III FIRST LEG LENGTH | 2.690 INCHES NOMINAL |
| III SECOND LEG LENGTH | 2.690 INCHES NOMINAL |
| III FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| III SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| III CENTER SECTION HEIGHT | 2.750 INCHES NOMINAL |
| III CENTER SECTION WIDTH | 1.500 INCHES NOMINAL |
| III CENTER SECTION THICKNESS | 0.250 INCHES NOMINAL |
| III FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| III SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG STYLE | 104 SQUARE |
| FIRST LEG WIDTH | 1.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 132 ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.500 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.502 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | 104 SQUARE |
| SECOND LEG WIDTH | 1.500 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 135 TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.188 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.812 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.314 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.188 INCHES NOMINAL |
| SPECIAL FEATURES | CENTER SECTION CONTAINS 2 HOLES,0.406 IN. MIN DIA,0.436 IN. MAX DIA,LOCATED 0.750 IN. FROM EACH END |
| III END ITEM IDENTIFICATION | CARRIER PERS FT M113A1 |
Restrictions/Controls & Freight Information | NSN 5340-01-066-7577
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| NMF Description | 095190 | HARDWARE, NOI SUB 9 |
| Less than car load rating | Q | 70 |
| Less than truck load rating | Q | 70.0 |
| Water commodity Code | 713 | unknown |
| Originating Activity Code | AZ | U.S. Army Tank-Automotive and Armaments Command Warren, MI 48397-5000 |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | V | Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |