NSN 5340-01-132-4941 01-132-4941, 011324941
Product Details | BUTT HINGE
5340-01-132-4941 A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
Part Alternates: 5340-01-132-4941, 01-132-4941, 5340011324941, 011324941
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 01-132-4941 | 22894 ( HINGE, BUTT ) |
Drawings & Photos | NSN 5340-01-132-4941
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5340-01-132-4941
Technical Data | NSN 5340-01-132-4941
| Characteristic | Specifications |
|---|---|
| MATERIAL AND LOCATION | BRASS, QQ-B-626, COMP 11 PIN OR STEEL, FED STD 66, COMP 302, 303, OR 304 PIN OR CRES,FED STD 66,COMP 305 PIN STEEL,FED STD 66 BODY |
| SURFACE TREATMENT AND LOCATION | CADMIUM, QQ-P-416, TYPE 2, CLASS 2 OVERALL OR ZINC, QQ-Z-325, TYPE 2, CLASS 2 OVERALL |
| STYLE DESIGNATOR | 8 BUTT |
| MATERIAL THICKNESS | 0.069 INCHES MINIMUM AND 0.079 INCHES MAXIMUM |
| MOUNTING HOLE DIAMETER | 0.157 INCHES NOMINAL |
| BODY WIDTH | 1.940 INCHES MINIMUM AND 2.060 INCHES MAXIMUM |
| PIN CENTER TO BODY EDGE DISTANCE | 0.815 INCHES MINIMUM AND 0.935 INCHES MAXIMUM |
| HINGE MOUNTING TYPE | FULL SURFACE |
| REVERSIBLE FEATURE | NOT INCLUDED |
| PIN REMOVABILITY | NONREMOVABLE |
| KNUCKLE TYPE | FRICTION |
| KNUCKLE QUANTITY | 5 |
| MOUNTING HOLE QUANTITY | 4 |
| PERFORMANCE TYPE | NOT RATED |
| NONDEFINITIVE SPEC/STD DATA | 2171H TYPE |
| MANUFACTURERS CODE | 81348 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FF-H-116 |
| MANUFACTURERS CODE | 96906 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS27966-6 |
Restrictions/Controls & Freight Information | NSN 5340-01-132-4941
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||