NSN 5340-01-208-9137 28886331, 2888633-1, 01-208-9137
Product Details | DOUBLE ANGLE BRACKET
5340-01-208-9137 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.202534000005342000000
Part Alternates: 28886331, 2888633-1, 5340-01-208-9137, 01-208-9137, 5340012089137, 012089137
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 21 MAY 1985 | 01-208-9137 | 20354 ( BRACKET, DOUBLE ANGLE ) |
Drawings & Photos | NSN 5340-01-208-9137
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5340-01-208-9137
Technical Data | NSN 5340-01-208-9137
| Characteristic | Specifications |
|---|---|
| MATERIAL | ALUMINUM ALLOY 5052 |
| SURFACE TREATMENT | CHROMATE |
| STYLE DESIGNATOR | 11 DOUBLE ANGLE |
| III FIRST LEG LENGTH | 1.190 INCHES NOMINAL |
| III SECOND LEG LENGTH | 4.560 INCHES NOMINAL |
| III FIRST LEG THICKNESS | 0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| III SECOND LEG THICKNESS | 0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| III CENTER SECTION HEIGHT | 1.250 INCHES NOMINAL |
| III CENTER SECTION WIDTH | 1.750 INCHES NOMINAL |
| III CENTER SECTION THICKNESS | 0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| III FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| III SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 146 ONE SLOT |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.620 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.321 INCHES NOMINAL |
| FIRST LEG SLOT WIDTH | 0.210 INCHES MINIMUM AND 0.216 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 146 ONE SLOT |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.875 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG SLOT LENGTH | 0.321 INCHES NOMINAL |
| SECOND LEG SLOT WIDTH | 0.210 INCHES MINIMUM AND 0.216 INCHES MAXIMUM |
| REINFORCEMENT METHOD | TURNED EDGE SECOND LEG TURNED EDGE CENTER SECTION |
Restrictions/Controls & Freight Information | NSN 5340-01-208-9137
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||