Product Details | DOUBLE ANGLE BRACKET

5340-01-246-1441 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.202534000005342000000

Part Alternates: 68A1123132002, 68A112313-2002, 5340-01-246-1441, 01-246-1441, 5340012461441, 012461441

Hardware and Abrasives | Hardware, Commercial

Supply Group (FSG) NSN Assign. NIIN
53 10 DEC 1986 01-246-1441

Drawings & Photos | NSN 5340-01-246-1441


Cross Reference | NSN 5340-01-246-1441

Part Number Cage Code Manufacturer
68A112313-2002 76301 BOEING COMPANY, THE DBA BOEING

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5340-01-246-1441

Technical Data | NSN 5340-01-246-1441

Characteristic Specifications
MATERIAL ALUMINUM
MATERIAL DOCUMENT AND CLASSIFICATION MIL-T-9046 TYPE 3 COMP C COND TN ANL MIL SPEC SINGLE MATERIAL RESPONSE
STYLE DESIGNATOR 11 DOUBLE ANGLE
III FIRST LEG THICKNESS 0.020 INCHES MINIMUM AND 0.028 INCHES MAXIMUM
III SECOND LEG THICKNESS 0.020 INCHES MINIMUM AND 0.028 INCHES MAXIMUM
III FIRST LEG ANGLE 40.0 DEGREES NOMINAL
III SECOND LEG ANGLE 40.0 DEGREES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE 133 TWO HOLES
FIRST LEG HOLE DIAMETER 0.196 INCHES MINIMUM AND 0.202 INCHES MAXIMUM
SECOND LEG RELATIONSHIP TO FIRST LEG NOT IDENTICAL
SECOND LEG HOLE ARRANGEMENT STYLE 137 THREE HOLES
SECOND LEG HOLE DIAMETER 0.196 INCHES MINIMUM AND 0.202 INCHES MAXIMUM
MOUNTING HOLE TYPE PLAIN
SPECIAL FEATURES 1ST LEG HOLES MATE WITH68A112297 OR 68A112310; 2ND LEG HOLES MATE 68A112101,68A112223 AND 68A112310 OR 68A112297
MANUFACTURERS CODE 76301
DESIGN CONTROL REFERENCE 68A112313-2002

Restrictions/Controls & Freight Information | NSN 5340-01-246-1441

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:DMunitions List Item or Commerce Control List Item. Demilitarization required. Total destruction of the item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DoD Demilitarization Program Office.)
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 095190 HARDWARE, NOI
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 713 unknown
Originating Activity Code TG Warner-Robins Air Logistics Center
Robins AFB, GA 31098-5609
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5340-01-246-1441

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeFXTG:F-15 EAGLE
Price ValidationP The current standard price is the initial negotiated provisioned price.
  • This is the price paid by DoD for the item as the result of price negotiation of the Provisioned Item Order (PIO) or other initial negotiated price.
  • ZOP or Standard Price challenges are permissible but should be supported with adequate justification.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item Code7NON-SENSITIVE (SRC-N/A) - UNCLASSIFIED AA&E: OR ITEMS ASSIGNED A DEMILITARIZATION CODE OTHER THAN A, B, Q, OR P FOR WHICH ANOTHER CIIC IS INAPPROPRIATE. (NOTE: THE LOSS, THEFT, UNLAWFUL DISPOSITION, AND/OR RECOVERY OF AN ITEM WITH CIIC 7 WILL BE INVESTIGATED IN ACCORDANCE WITH DOD-4000-25-2-M AND DOD 7200.14-R, VOLUME 12, CHAPTER 7).
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each