NSN 5340-01-306-7908 60220192, 60220-192, 01-306-7908
Product Details | DOUBLE ANGLE BRACKET
5340-01-306-7908 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.202534000005342000000
Part Alternates: 60220192, 60220-192, 5340-01-306-7908, 01-306-7908, 5340013067908, 013067908
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 30 AUG 1989 | 01-306-7908 | 20354 ( BRACKET, DOUBLE ANGLE ) |
Drawings & Photos | NSN 5340-01-306-7908
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5340-01-306-7908
Technical Data | NSN 5340-01-306-7908
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 302 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE TREATMENT | PASSIVATE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 TY 4 FED SPEC SINGLE TREATMENT RESPONSE |
| STYLE DESIGNATOR | 11 DOUBLE ANGLE |
| III FIRST LEG LENGTH | 0.690 INCHES NOMINAL |
| III SECOND LEG LENGTH | 0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM |
| III FIRST LEG THICKNESS | 0.0403 INCHES NOMINAL |
| III SECOND LEG THICKNESS | 0.0403 INCHES NOMINAL |
| III CENTER SECTION HEIGHT | 0.848 INCHES NOMINAL |
| III CENTER SECTION WIDTH | 1.250 INCHES NOMINAL |
| III CENTER SECTION THICKNESS | 0.0403 INCHES NOMINAL |
| III FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| III SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG STYLE | 109 SQUARE END AND TAPERED |
| FIRST LEG END WIDTH | 0.700 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 133 TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.145 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.300 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.200 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.225 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | 104 SQUARE |
| SECOND LEG HOLE ARRANGEMENT STYLE | 132 ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.145 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.100 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.125 INCHES NOMINAL |
| MOUNTING HOLE TYPE | PLAIN |
| SPECIAL FEATURES | ONE HOLE ON CENTER SECTION 0.236 IN. DIA |
Restrictions/Controls & Freight Information | NSN 5340-01-306-7908
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||