NSN 5340-01-381-3778 01-381-3778, 013813778
Product Details | DOUBLE ANGLE BRACKET
5340-01-381-3778 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.202534000005342000000
Part Alternates: 5340-01-381-3778, 01-381-3778, 5340013813778, 013813778
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 01-381-3778 | 20354 ( BRACKET, DOUBLE ANGLE ) |
Drawings & Photos | NSN 5340-01-381-3778
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5340-01-381-3778
Technical Data | NSN 5340-01-381-3778
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A570 GRADE 36 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE TREATMENT | PAINT |
| STYLE DESIGNATOR | 11 DOUBLE ANGLE |
| III FIRST LEG LENGTH | 78.0 MILLIMETERS NOMINAL |
| III SECOND LEG LENGTH | 85.0 MILLIMETERS NOMINAL |
| III FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| III SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| III CENTER SECTION HEIGHT | 65.5 MILLIMETERS NOMINAL |
| III CENTER SECTION WIDTH | 100.0 MILLIMETERS NOMINAL |
| III CENTER SECTION THICKNESS | 0.250 INCHES NOMINAL |
| FIRST LEG STYLE | 104 SQUARE |
| FIRST LEG WIDTH | 100.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 135 TWO HOLES |
| FIRST LEG HOLE DIAMETER | 11.27 MILLIMETERS MINIMUM AND 11.45 MILLIMETERS MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 66.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 38.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 17.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 15.0 MILLIMETERS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | 104 SQUARE |
| SECOND LEG WIDTH | 100.0 MILLIMETERS NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 135 TWO HOLES |
| SECOND LEG HOLE DIAMETER | 11.45 MILLIMETERS MINIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 66.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 38.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 17.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 15.0 MILLIMETERS NOMINAL |
| MOUNTING HOLE TYPE | PLAIN |
Restrictions/Controls & Freight Information | NSN 5340-01-381-3778
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||