NSN 5340-01-451-3855 11455382, 01-451-3855, 014513855
Product Details | DOUBLE ANGLE BRACKET
5340-01-451-3855 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.202534000005342000000
Part Alternates: 11455382, 5340-01-451-3855, 01-451-3855, 5340014513855, 014513855
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 15 DEC 1997 | 01-451-3855 | 20354 ( BRACKET, DOUBLE ANGLE ) |
Drawings & Photos | NSN 5340-01-451-3855
Cross Reference | NSN 5340-01-451-3855
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 11455382 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5340-01-451-3855
Technical Data | NSN 5340-01-451-3855
| Characteristic | Specifications |
|---|---|
| MATERIAL | ALUMINUM ALLOY 5052 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8 TEMPER H32 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE TREATMENT | OXIDE FILM AND CHROMATE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541, CL 1A OR 3 MIL SPEC 2ND TREATMENT RESPONSE |
| STYLE DESIGNATOR | 12 OFFSET DOUBLE ANGLE |
| III FIRST LEG LENGTH | 1.500 INCHES NOMINAL |
| III SECOND LEG LENGTH | 2.120 INCHES NOMINAL |
| III FIRST LEG THICKNESS | 0.125 INCHES NOMINAL |
| III SECOND LEG THICKNESS | 0.125 INCHES NOMINAL |
| III CENTER SECTION WIDTH | 1.440 INCHES NOMINAL |
| III CENTER SECTION THICKNESS | 0.125 INCHES NOMINAL |
| FIRST LEG STYLE | 114 CHAMFERED ENDS |
| FIRST LEG WIDTH | 1.440 INCHES NOMINAL |
| FIRST LEG END WIDTH | 0.940 INCHES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 145 ONE SLOT |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.720 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.750 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.505 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| FIRST LEG SLOT WIDTH | 0.473 INCHES MINIMUM AND 0.478 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | 114 CHAMFERED ENDS |
| SECOND LEG WIDTH | 1.440 INCHES NOMINAL |
| SECOND LEG END WIDTH | 1.200 INCHES NOMINAL |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 133 TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.174 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.190 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
Restrictions/Controls & Freight Information | NSN 5340-01-451-3855
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Electro-static Discharge Susceptible: | A | No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||