NSN 5340-01-569-3371 241 0NV929712-1M3308-001, 2410NV9297121M3308001, 97121M3308001
Product Details | DOUBLE ANGLE BRACKET
5340-01-569-3371 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.202534000005342000000
Part Alternates: 241 0NV929712-1M3308-001, 2410NV9297121M3308001, 97121M3308001, 9712-1M3308-001, 5340-01-569-3371, 01-569-3371, 5340015693371, 015693371
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 26 NOV 2008 | 01-569-3371 | 20354 ( BRACKET, DOUBLE ANGLE ) |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5340-01-569-3371
Technical Data | NSN 5340-01-569-3371
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | ADJACENT ANGLES |
| MOUNTING HOLE TYPE | PLAIN |
| FIRST LEG LENGTH | 0.517 INCHES NOMINAL |
| CENTER SECTION WIDTH | 0.547 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| SURFACE TREATMENT | ANODIZE |
| SECOND LEG LENGTH | 0.517 INCHES NOMINAL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625E,TY II,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HINGE,EMERGENCY COVER,TRIM CONTROL PANEL |
| SECOND LEG THICKNESS | 0.090 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.050 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.090 INCHES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| CENTER SECTION HEIGHT | 1.800 INCHES NOMINAL |
| SPECIAL FEATURES | MAIN SURFACE HAS 2 EACH 0.120 INCH DIAMETER THRU HOLES LOCATED CENTEREDAT 1.300 INCHES APART AND 0.387 INCHESFROM FRONT EDGE;LEGS HAVE ONE THRU HOLE EACH OF 0.095 INCH DIAMETER LOCATED 0.145 INCHES FROM BOTTOM EDGE AND 0.093 INCHES FROM REAR EDGE;LEGS ALSO HAVETWO ADDITIONAL HOLES EACH, COUNTERBORED AT 90 DEGREES LOCATED AT 0.338 INCHES FROM BACK AND BOTTOM EDGES |
| MATERIAL | ALUMINUM ALLOY 6061 |
Restrictions/Controls & Freight Information | NSN 5340-01-569-3371
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Electro-static Discharge Susceptible: | A | No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||