NSN 5340-01-611-6942 106A0389 , 01-611-6942, 016116942
Product Details | DOUBLE ANGLE BRACKET
5340-01-611-6942 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.202534000005342000000
Part Alternates: 106A0389 , 5340-01-611-6942, 01-611-6942, 5340016116942, 016116942
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 2012268 | 01-611-6942 | 20354 ( BRACKET, DOUBLE ANGLE ) |
Cross Reference | NSN 5340-01-611-6942
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 106A0389 | 2X262 | MIL-MAR CENTURY CORPORATION |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
Ernie G.
Honeywell
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
NSNs for Compare ( up to 4 ): Add 5340-01-611-6942
Related Products | NSN 5340-01-611-6942
Technical Data | NSN 5340-01-611-6942
| Characteristic | Specifications |
|---|---|
| MATERIAL | ALUMINUM ALLOY 6061 |
| SURFACE TREATMENT | PAINT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-53072 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| FIRST LEG LENGTH | 1.565 INCHES MINIMUM AND |
| SECOND LEG LENGTH | 1.565 INCHES MINIMUM AND |
| FIRST LEG THICKNESS | 0.150 INCHES MINIMUM AND |
| SECOND LEG THICKNESS | 0.150 INCHES MINIMUM AND |
| CENTER SECTION HEIGHT | 3.985 INCHES MINIMUM AND |
| CENTER SECTION WIDTH | 41.985 INCHES MINIMUM AND |
| CENTER SECTION THICKNESS | 0.150 INCHES MINIMUM AND |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| HOLE QUANTITY | 10 |
| FIRST LEG STYLE | EXTENDED FLAT |
| FIRST LEG WIDTH | 41.985 INCHES MINIMUM AND |
| SECOND LEG WIDTH | 41.985 INCHES MINIMUM AND |
| FIRST LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| FIRST LEG HOLE DIAMETER | 0.266 INCHES MINIMUM AND |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 40.000 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 12.985 INCHES MINIMUM AND |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 13.985 INCHES MINIMUM AND |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.985 INCHES MINIMUM AND |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.33 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.235 INCHES MINIMUM AND |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| MOUNTING HOLE TYPE | PLAIN |
| SPECIAL FEATURES | THE FIRST HOLE ALONG THE SECOND LEG HAS A DIAMETER OF 0.218 INCHES. THE ITEM IS PAINTED GREEN 383 CHIP NUMBER 34094 PER MIL-STD-595 |
| III END ITEM IDENTIFICATION | 5340-01-487-7760 |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | C-CHANNEL |
Restrictions/Controls & Freight Information | NSN 5340-01-611-6942
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| NMF Description | 093600 | BRACKETS/BUSHINGS/JOINTS/MOUNTS ETC |
| Less than car load rating | ||
| Less than truck load rating | Q | 70.0 |
| Water commodity Code | 713 | unknown |
| Originating Activity Code | AZ | U.S. Army Tank-Automotive and Armaments Command Warren, MI 48397-5000 |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | B | Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 5340-01-611-6942
Army| Category | Code | Description |
|---|---|---|
| Materiel Category and Inventory Manager | T | Industrial Supplies (DLA/GSA Items) |
| Appropriation and Budget Activity | 2 | Stock Fund Secondary Items |
| Management Inventory Segment | 2 | NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable. |
| Specific Group/Generic Code | 0 | Medical Materiel |
| Weapons Systems/End Item or Homogeneous Group | 00 | DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item |
| Accounting Requirements Code | X | Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items. |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DA | Department of the Army |
| Service Organization | A | U.S. Army |
| Reparability | Z | This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Acquisition Advice Codes | J | NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |