NSN 5340-01-642-4382 G5470001G5472100072, G547-0001-G5472100-072 , G5470001G5472100072D4
Product Details | G5470001G5472100072, G547-0001-G5472100-072 , G5470001G5472100072D4
5340-01-642-4382 An item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
Part Alternates: G5470001G5472100072, G547-0001-G5472100-072 , G5470001G5472100072D4, G547-0001-G5472100-072D4 , G547-2100 PN 72 , G547-2100 PN 72D4 , G5472100072, G5472100-072 , G5472100072D4, G5472100-072D4 , G5472100PN72, G5472100PN72D4, 7384566 PN 72 , 7384566 PN 72D4 , 7384566PN72, 7384566PN72D4, 7550477G5472100072, 7550477-G5472100-072 , 7550477G5472100072D4, 7550477-G5472100-072D4 , 5340-01-642-4382, 01-642-4382, 5340016424382, 016424382
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 2015056 | 01-642-4382 | 52551 ( CLIP, ROD RETAINER ) |
Request a Quote
What Our Customers Say
Compare
Related Products | NSN 5340-01-642-4382
Restrictions/Controls & Freight Information | NSN 5340-01-642-4382
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Electro-static Discharge Susceptible: | A | No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | S | The item is a non-aviation Critical Safety Item (CSI) whose failure will result in serious damage to equipment or serious injury or death to personnel. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||
Management | NSN 5340-01-642-4382
| Category | Code | Description |
|---|---|---|
| Cognizance Codes | 1H | Consumable material assigned to NAVICP MECH for inventory management Naval Inventory Control Point, Mechanicsburg |
| Special Material ID | D4 | An item that supports the Deep Submergence Program and is considered Scope of Certification MCD "B" material. Each item has undergone Receipt Inspection to insure it meets the requirements of the applicable specification and /or drawing and is certified for use in DSS-SOC applications. Items shall have 10.3-140 CODEIDENTIFIES ITEMS WITH PREDOMINANT APPLICATION TO:serialization markings identified on a securely attached Ready For Issue (RFI) tag. |
| Source of Supply | NRP | NAVICP-ERP 700 Robbins Avenue Philadelphia, PA 19111-5098 |
| Agency | DN | Department of the Navy |
| Service Organization | N | U.S. Navy |
| Reparability | H | Depot Level Reparable |
| Acquisition Advice Codes | J | NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |



