Product Details | SHIM

5365-00-011-1989 A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.

Part Alternates: 2642752, 5365-00-011-1989, 00-011-1989, 5365000111989, 000111989

Hardware and Abrasives | Bushings, Rings, Shims, and Spacers

Supply Group (FSG) NSN Assign. NIIN
53 01 MAY 1968 00-011-1989

Drawings & Photos | NSN 5365-00-011-1989


Demand History | NSN 5365-00-011-1989

Part Number Request Date QTY Origin
2642752 2025-03-77 126 DIBBS
2642752 2024-09-261 232 DIBBS
2642752 2023-06-165 768 DIBBS
2642752 2023-06-157 768 DIBBS
2642752 2021-02-49 55 DIBBS
2642752 2020-04-111 439 DIBBS
2642752 2020-04-98 439 DIBBS
5365-00-011-1989 2018-10-284 213 DIBBS
5365-00-011-1989 2018-09-263 213 DIBBS
5365-00-011-1989 2014-03-87 244 DIBBS
5365-00-011-1989 2014-03-72 244 DIBBS
5365-00-011-1989 2014-01-24 155 DIBBS
5365-00-011-1989 2014-01-09 155 DIBBS

Cross Reference | NSN 5365-00-011-1989

Part Number Cage Code Manufacturer
2642752 06848 HONEYWELL INTERNATIONAL INC. DBA HONEYWELL

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5365-00-011-1989

Technical Data | NSN 5365-00-011-1989

Characteristic Specifications
MATERIAL STEEL CORROSION RESISTING
SURFACE TREATMENT PASSIVATE
CONSTRUCTION ONE-PIECE
STYLE DESIGNATOR A1 CIRCULAR
OUTSIDE DIAMETER 0.310 INCHES NOMINAL
APERTURE DIAMETER 0.190 INCHES NOMINAL
MANUFACTURERS CODE 06848
DESIGN CONTROL REFERENCE 2642752

Restrictions/Controls & Freight Information | NSN 5365-00-011-1989

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 095190 HARDWARE, NOI
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 713 unknown
Originating Activity Code SE San Antonio Air Logistics Center
Kelly AFB, TX 78241-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Z No special handling required.
Special Handling Code Z unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5365-00-011-1989

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationD The contract unit price, which is the basis for the standard price, has been analyzed and is considered to be excessive. Price change is deferred because the item is not in a buy status.
  • The price has been analyzed. The price is excessive but a service or agency of the Department of Defense did pay that price.
  • While the future price is unknown, the proper price range has been established.
  • ZOP or Standard price challenges will be accepted, but must be supported by adequate justification. In most cases, unless new information is presented, the challenge will be closed as a duplicate challenge.
Materiel Management Aggregation CodePQSX:PRATT & WHITNEY ENGINES AND COMPONENTS, TF-30
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each