NSN 5365-01-127-8185 13008362, 01-127-8185, 011278185
Product Details | PLATE SPACER
5365-01-127-8185 A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.202259000005365000000
Part Alternates: 13008362, 5365-01-127-8185, 01-127-8185, 5365011278185, 011278185
Hardware and Abrasives | Bushings, Rings, Shims, and Spacers
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 09 MAR 1982 | 01-127-8185 | 26979 ( SPACER, PLATE ) |
Drawings & Photos | NSN 5365-01-127-8185
Demand History | NSN 5365-01-127-8185
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| 5365-01-127-8185 | 2019-08-238 | 24 | DIBBS |
| 5365-01-127-8185 | 2019-08-226 | 24 | DIBBS |
| 5365-01-127-8185 | 2017-03-69 | 98 | DIBBS |
| 5365-01-127-8185 | 2017-02-38 | 98 | DIBBS |
| 5365-01-127-8185 | 2016-11-330 | 78 | DIBBS |
| 5365-01-127-8185 | 2016-10-299 | 78 | DIBBS |
| 5365-01-127-8185 | 2013-04-99 | 57 | DIBBS |
| 5365-01-127-8185 | 2013-04-91 | 214 | DIBBS |
| 5365-01-127-8185 | 2013-02-35 | 151 | DIBBS |
| 5365-01-127-8185 | 2012-10-277 | 146 | DIBBS |
| 5365-01-127-8185 | 2012-08-229 | 3 | DIBBS |
| 5365-01-127-8185 | 2012-07-207 | 1 | DIBBS |
| 5365-01-127-8185 | 2012-07-201 | 27 | DIBBS |
| 5365-01-127-8185 | 2012-07-195 | 12 | DIBBS |
| 5365-01-127-8185 | 2012-05-135 | 7 | DIBBS |
| 5365-01-127-8185 | 2012-02-48 | 14 | DIBBS |
| 5365-01-127-8185 | 2011-12-355 | 2 | DIBBS |
| 5365-01-127-8185 | 2011-10-278 | 2 | DIBBS |
| 5365-01-127-8185 | 2011-01-06 | 1 | DIBBS |
| 5365-01-127-8185 | 2010-03-77 | 4 | DIBBS |
| 5365-01-127-8185 | 2009-02-48 | 30 | DIBBS |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5365-01-127-8185
Technical Data | NSN 5365-01-127-8185
| Characteristic | Specifications |
|---|---|
| MATERIAL | PLASTIC |
| BOLT HOLE QUANTITY | 4 |
| STYLE DESIGNATOR | A21 CIRCULAR |
| HOLE DIAMETER | 3.7 MILLIMETERS MINIMUM AND 3.9 MILLIMETERS MAXIMUM |
| BOLT CIRCLE DIAMETER | 114.3 MILLIMETERS NOMINAL |
| OUTSIDE DIAMETER | 157.9 MILLIMETERS MINIMUM AND 159.5 MILLIMETERS MAXIMUM |
| APERTURE DIAMETER | 75.2 MILLIMETERS MINIMUM AND 76.0 MILLIMETERS MAXIMUM |
| MANUFACTURERS CODE | 18876 |
| DESIGN CONTROL REFERENCE | 13008362 |
Restrictions/Controls & Freight Information | NSN 5365-01-127-8185
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
| Demilitarization Code: | Q | Strategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.” |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| NMF Description | 095190 | HARDWARE, NOI SUB 9 |
| Less than car load rating | Q | 70 |
| Less than truck load rating | Q | 70.0 |
| Water commodity Code | 713 | unknown |
| Originating Activity Code | BD | U.S. Army Aviation and Missile Command Redstone Arsenal, AL 35898-5230 |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | B | Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 5365-01-127-8185
Army
Navy| Category | Code | Description |
|---|---|---|
| Materiel Category and Inventory Manager | T | Industrial Supplies (DLA/GSA Items) |
| Appropriation and Budget Activity | 2 | Stock Fund Secondary Items |
| Management Inventory Segment | 2 | NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable. |
| Specific Group/Generic Code | 0 | Medical Materiel |
| Weapons Systems/End Item or Homogeneous Group | 00 | DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item |
| Accounting Requirements Code | X | Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items. |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DA | Department of the Army |
| Service Organization | A | U.S. Army |
| Reparability | Z | This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Acquisition Advice Codes | Z | INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |
| Category | Code | Description |
|---|---|---|
| Cognizance Codes | 9B | Navy-owned stocks of DLA material Naval Inventory Control Point, Mechanicsburg |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DN | Department of the Navy |
| Service Organization | N | U.S. Navy |
| Acquisition Advice Codes | Z | INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |