Product Details | RING SPACER

5365-01-141-3476 A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE.

Part Alternates: 997C669 ITEM 2, 997C669ITEM2, 5365-01-141-3476, 01-141-3476, 5365011413476, 011413476

Hardware and Abrasives | Bushings, Rings, Shims, and Spacers

Supply Group (FSG) NSN Assign. NIIN
53 27 OCT 1982 01-141-3476

Cross Reference | NSN 5365-01-141-3476

Part Number Cage Code Manufacturer
997C669 ITEM 2 94259 WESTINGHOUSE ELECTRIC CORP BETTIS ATOMIC POWER LABORATORY

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5365-01-141-3476

Technical Data | NSN 5365-01-141-3476

Characteristic Specifications
MATERIAL STEEL COMP 304
MATERIAL DOCUMENT AND CLASSIFICATION ASTM A240 ASSN STD SINGLE MATERIAL RESPONSE
INSIDE DIAMETER 9.437 INCHES MINIMUM AND 9.457 INCHES MAXIMUM
OUTSIDE DIAMETER 10.000 INCHES NOMINAL
SPECIAL FEATURES THREE HOLES EQUALLY SPACED PERPENDICULAR TO THE AXIS OF THE CENTRALLY LOCATED HOLES WITH 0.047 IN. DIA; THREE NOTCHES 0.060 IN. WIDE ON INSIDE DIA AT HOLES
TEST DATA DOCUMENT 81349-MIL-P-23199 SPECIFICATION
SPECIAL TEST FEATURES SPECIAL QUALITY CONTROL TESTING
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS AS DIFFERENTIATED BY MATERIAL WHICH SHALL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER QUALITY CONTROL PROVISIONS AND FREE OF MECURY CONTAMINATION
CRITICALITY CODE JUSTIFICATION ZZZY
MANUFACTURERS CODE 94259
DESIGN CONTROL REFERENCE 997C669 ITEM 2

Restrictions/Controls & Freight Information | NSN 5365-01-141-3476

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:FMunitions List Item or Commerce Control List Item. Demilitarization required. Demilitarization Instructions to be furnished by the Item/Technical Manager.
Controlled Inventory Item Code:7NON-SENSITIVE (SRC-N/A) - UNCLASSIFIED AA&E: OR ITEMS ASSIGNED A DEMILITARIZATION CODE OTHER THAN A, B, Q, OR P FOR WHICH ANOTHER CIIC IS INAPPROPRIATE. (NOTE: THE LOSS, THEFT, UNLAWFUL DISPOSITION, AND/OR RECOVERY OF AN ITEM WITH CIIC 7 WILL BE INVESTIGATED IN ACCORDANCE WITH DOD-4000-25-2-M AND DOD 7200.14-R, VOLUME 12, CHAPTER 7).
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:YThe item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information

Management | NSN 5365-01-141-3476

Category Code Description
Cognizance Codes1HConsumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
Special Material IDX3Nuclear Reactor Plant (NRP) material under the technical cognizance of the NAVSEA 08 special designed, manufactured and/or treated for use in a NRP or controls thereof. This category includes all other NRP items which are not coded X2 or X4.
Issue Repair, or RequisitionBLSubmit/refer requisitions to NAVICP MECH. Centralized control for issue of repair parts for specific programs/equipments.
Source of SupplyNRPNAVICP-ERP
700 Robbins Avenue
Philadelphia, PA 19111-5098
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
ReparabilityMMedium Demand Velocity Items (consumables)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item Code7NON-SENSITIVE (SRC-N/A) - UNCLASSIFIED AA&E: OR ITEMS ASSIGNED A DEMILITARIZATION CODE OTHER THAN A, B, Q, OR P FOR WHICH ANOTHER CIIC IS INAPPROPRIATE. (NOTE: THE LOSS, THEFT, UNLAWFUL DISPOSITION, AND/OR RECOVERY OF AN ITEM WITH CIIC 7 WILL BE INVESTIGATED IN ACCORDANCE WITH DOD-4000-25-2-M AND DOD 7200.14-R, VOLUME 12, CHAPTER 7).
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each