NSN 5365-01-248-0466 DGR298H, DGR298HVM, DGR4350B PT92

5365-01-248-0466 A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.202259000005365000000

Part Alternates: DGR298H, DGR298HVM, DGR4350B PT92, DGR4350B PT92VM, DGR4350BPT92, DGR4350BPT92VM, DGR-4350C PART 92 , DGR4350C PT92, DGR4350C PT92VM, DGR4350CPART92, DGR4350CPT92, DGR4350CPT92VM, 5365-01-248-0466, 01-248-0466, 5365012480466, 012480466

Hardware and Abrasives | Bushings, Rings, Shims, and Spacers