Product Details | PLATE SPACER

5365-01-396-0507 A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.202259000005365000000

Part Alternates: 1217071101, 1217071-101, 5365-01-396-0507, 01-396-0507, 5365013960507, 013960507

Hardware and Abrasives | Bushings, Rings, Shims, and Spacers

Supply Group (FSG) NSN Assign. NIIN
53 12 SEP 1994 01-396-0507

Drawings & Photos | NSN 5365-01-396-0507


Cross Reference | NSN 5365-01-396-0507

Part Number Cage Code Manufacturer
1217071-101 03538 LOCKHEED MARTIN CORPORATION DIV MST
1217071-101 56232 LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5365-01-396-0507

Technical Data | NSN 5365-01-396-0507

Characteristic Specifications
MATERIAL STEEL
OVERALL THICKNESS 0.058 INCHES MINIMUM AND 0.066 INCHES MAXIMUM
STYLE DESIGNATOR A24 RECTANGULAR
OVERALL LENGTH 4.980 INCHES MINIMUM AND 5.020 INCHES MAXIMUM
OVERALL WIDTH 2.980 INCHES MINIMUM AND 3.020 INCHES MAXIMUM
SPECIAL FEATURES U-SHAPED SLOT, 1.12 IN WIDTH, 3.25 IN LENGTH PLUS .56 IN RADIUS; DRAWING NAME: SHIM, PEDESTAL; NHA P/N 1215201
III END ITEM IDENTIFICATION NEXT GENERATION RADAR (NEXRAD)

Restrictions/Controls & Freight Information | NSN 5365-01-396-0507

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information

Management | NSN 5365-01-396-0507

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Materiel Management Aggregation CodeZESU:"METEOROLOGICAL EQUIPMENT 433L, WEATHER OBSERVATION AND FORECASTING SYSTEMS, METEROLOGICAL/WEATHER PROJECTS"
Source of SupplyG13Department of Commerce
National Oceanic and Atmospheric Administration
National Weather Service - Engineering Division
1325 East-West Highway
W/0S0322, SSMC2
Silver Springs, MD 20910
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesGGENERAL SERVICES ADMINISTRATION (GSA)/CIVIL AGENCY INTEGRATED MATERIEL MANAGED, STOCKED AND ISSUED Identifies GSA/Civil Agency-managed items available from GSA/Civil Agency supply distribution facilities. Requisitions and fund citations will be submitted in accordance with GSA/Civil Agency/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9PNavy-owned stocks of National Weather Service
Naval Inventory Control Point, Mechanicsburg
Source of SupplyG13Department of Commerce
National Oceanic and Atmospheric Administration
National Weather Service - Engineering Division
1325 East-West Highway
W/0S0322, SSMC2
Silver Springs, MD 20910
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesVTERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each