Product Details | FILM FIXED RESISTOR

5905-00-258-5943 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.

Part Alternates: MILR105091, MILR10509-1 , MILR551823, MILR55182-3, RN60C2492D , RNC60H2492DM, RNC60H2492DP, RNC60H2492DR, RNC60H2492DS, 5905-00-258-5943, 00-258-5943, 5905002585943, 002585943

Electrical and Electronic Equipment Components | Resistors

Supply Group (FSG) NSN Assign. NIIN
59 24 JUN 1973 00-258-5943

Cross Reference | NSN 5905-00-258-5943

Part Number Cage Code Manufacturer
MILR10509-1 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MILR55182-3 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
RN60C2492D 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
RNC60H2492DM 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
RNC60H2492DP 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
RNC60H2492DR 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
RNC60H2492DS 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5905-00-258-5943

Technical Data | NSN 5905-00-258-5943

Characteristic Specifications
RELIABILITY INDICATOR ESTABLISHED
ELECTRICAL RESISTANCE 24.900 KILOHMS
RELIABILITY FAILURE RATE LEVEL IN PERCENT 0.001
TEST DATA DOCUMENT 81349-MILR55182 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS -50.0/+50.0
BODY LENGTH 0.375 INCHES NOMINAL
RESISTANCE TOLERANCE IN PERCENT -0.500/+0.500
AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER 175.0
AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER 125.0
TERMINAL TYPE WIRE LEAD
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS -55.0/+175.0
STYLE DESIGNATOR AXIAL TERMINAL EACH END
BODY DIAMETER 0.125 INCHES NOMINAL
POWER DISSIPATION RATING IN WATTS 0.125 FREE AIR
INCLOSURE METHOD ENCAPSULATED

Restrictions/Controls & Freight Information | NSN 5905-00-258-5943

Category Code Description
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Electro-static Discharge Susceptible:BESD sensitivity
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 062960 REOSTATS/PARTS NOI
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo 3 Electrostatic Sensitive Device (ESD), subject to damage caused by electrostatic discharge. (See DoD 4500.32-R, Volume 1, Appendix A, Section I for additional information on ESD devices).