Product Details | FILM FIXED RESISTOR NETWORK

5905-01-024-0369 An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.

Part Alternates: 755090A00315, 755090A0031-5, 5905-01-024-0369, 01-024-0369, 5905010240369, 010240369

Electrical and Electronic Equipment Components | Resistors

Supply Group (FSG) NSN Assign. NIIN
59 03 JUL 1976 01-024-0369

Drawings & Photos | NSN 5905-01-024-0369


Cross Reference | NSN 5905-01-024-0369

Part Number Cage Code Manufacturer
755090A0031-5 87990 QUARTERMASTER GENERAL

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5905-01-024-0369

Technical Data | NSN 5905-01-024-0369

Characteristic Specifications
ELECTRICAL RESISTANCE 2.000 KILOHMS 432.000 KILOHMS 43.200 KILOHMS 73.200 KILOHMS 127.000 KILOHMS 143.000 KILOHMS
IDENTICAL VALUE RESISTOR QUANTITY 2 LOWEST RESISTANCE VALUE 2 HIGHEST RESISTANCE VALUE 2 1ST INTERMEDIATE RESISTANCE VALUE 2 2ND INTERMEDIATE RESISTANCE VALUE 4 3RD INTERMEDIATE RESISTANCE VALUE 2 4TH INTERMEDIATE RESISTANCE VALUE
RESISTANCE TOLERANCE IN PERCENT -1.000 TO 1.000
POWER DISSIPATION RATING IN WATTS 1.500 TOTAL NETWORK
AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER 70.0
AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER 125.0
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS -100.0 TO 100.0
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS -55.0 TO 125.0
SCHEMATIC DIAGRAM DESIGNATOR 2 LADDER NETWORK
INCLOSURE METHOD ENCAPSULATED
STYLE DESIGNATOR 220 DUAL INLINE
BODY LENGTH 0.784 INCHES MINIMUM AND 0.876 INCHES MAXIMUM
BODY WIDTH 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
BODY HEIGHT 0.200 INCHES MAXIMUM
TERMINAL TYPE WIRE LEAD
TERMINAL QUANTITY 16
RELIABILITY INDICATOR NOT ESTABLISHED
TERMINAL LENGTH 0.125 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
TERMINAL WIDTH 0.014 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
TEST DATA DOCUMENT 87990-755090A0031 DRAWING
(NON-CORE DATA) CUBIC MEASURE 0.054 CUBIC INCHES

Restrictions/Controls & Freight Information | NSN 5905-01-024-0369

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Electro-static Discharge Susceptible:BESD sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 062960 REOSTATS/PARTS NOI
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code PA Marine Corps Logistics Base
Albany, GA 31704-1128
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo 3 Electrostatic Sensitive Device (ESD), subject to damage caused by electrostatic discharge. (See DoD 4500.32-R, Volume 1, Appendix A, Section I for additional information on ESD devices).

Management | NSN 5905-01-024-0369

Category Code Description
Stores Account Code1Marine Corps Stock Fund Account Item.
Combat Essentiality Code5Critical Repair Part to a Combat Essential End Item. Those parts or components whose failure in a combat essential end item will render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency.
Materiel Management CodeBAll CommoditiesDefense Logistics Agency, (DLA,)
Echelon Management Code2ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled.
Echelon Identification CodeBConsumable Repair Parts
Physical Category Code1Bin
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDMU.S. Marine Corps
Service OrganizationMU.S. Marine Corps
ReparabilityZNonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code.
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each