Product Details | PRECISION NONWIRE WOUND VARIABLE RESISTOR

5905-01-041-5353 A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Part Alternates: 116FL2109, 116FL2-109, 7263473, 726347-3, 5905-01-041-5353, 01-041-5353, 5905010415353, 010415353

Electrical and Electronic Equipment Components | Resistors

Supply Group (FSG) NSN Assign. NIIN
59 28 MAY 1977 01-041-5353

Drawings & Photos | NSN 5905-01-041-5353


Demand History | NSN 5905-01-041-5353

Part Number Request Date QTY Origin
5905-01-041-5353 2014-11-314 7 DIBBS
5905-01-041-5353 2014-10-303 7 DIBBS

Cross Reference | NSN 5905-01-041-5353

Part Number Cage Code Manufacturer
116FL2-109 08815 HONEYWELL INTERNATIONAL INC. DBA HONEYWELL
726347-3 73030 HAMILTON SUNDSTRAND CORPORATION

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5905-01-041-5353

Technical Data | NSN 5905-01-041-5353

Characteristic Specifications
SECTION QUANTITY 2
RESISTANCE TOLERANCE PER SECTION IN PERCENT -2.0 TO 2.0 1ST SECTION -2.0 TO 2.0 2ND SECTION
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS -400.0 TO 400.0 1ST SECTION -400.0 TO 400.0 1ST SECTION
BODY STYLE 5B CYLINDRICAL SERVO MOUNTED
UNDERCUT DIAMETER 0.975 INCHES MAXIMUM
BODY DIAMETER 1.073 INCHES NOMINAL
SHAFT STYLE 3C ROUND, SLOTTED
SHAFT DIAMETER 0.124 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM
SHAFT LENGTH 0.105 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
MOUNTING METHOD CLAMP RING
TERMINAL TYPE AND QUANTITY 2 BINDING POST
TERMINAL LOCATION RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
MANUFACTURERS CODE 73030
MFR SOURCE CONTROLLING REFERENCE 726347-3

Restrictions/Controls & Freight Information | NSN 5905-01-041-5353

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Electro-static Discharge Susceptible:BESD sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 062960 REOSTATS/PARTS NOI
Less than car load rating P 77.5
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code SX Oklahoma City Air Logistics Center
Tinker AFB, OK 73145-3043
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo 3 Electrostatic Sensitive Device (ESD), subject to damage caused by electrostatic discharge. (See DoD 4500.32-R, Volume 1, Appendix A, Section I for additional information on ESD devices).

Management | NSN 5905-01-041-5353

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Materiel Management Aggregation CodeTPSX:"TEMPERATURE AND PRESSURE CONTROLS, AIRCRAFT"
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each