NSN 5905-01-118-0010 P2600801, P26-008-01, F391
Product Details | INDUCTIVE WIRE WOUND FIXED RESISTOR
5905-01-118-0010 INC 37403 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
Part Alternates: P2600801, P26-008-01, F391, 5905-01-118-0010, 01-118-0010, 5905011180010, 011180010
Electrical and Electronic Equipment Components | Resistors
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | 25 AUG 1981 | 01-118-0010 | 37403 ( RESISTOR, FIXED, WIRE WOUND, INDUCTIVE ) |
Request a Quote
What Our Customers Say
Compare
NSNs for Compare ( up to 4 ): Add 5905-01-118-0010
Related Products | NSN 5905-01-118-0010
Technical Data | NSN 5905-01-118-0010
| Characteristic | Specifications |
|---|---|
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0/+150.0 |
| POWER DISSIPATION RATING IN WATTS | 0.500 FREE AIR |
| TERMINAL LENGTH | 1.500 INCHES MINIMUM |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 |
| TEST DATA DOCUMENT | 18876-+26-008 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| BODY LENGTH | 0.400 INCHES MAXIMUM |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0/+50.0 |
| RESISTANCE TOLERANCE IN PERCENT | -1.000/+1.000 |
| BODY DIAMETER | 0.125 INCHES MINIMUM AND 0.155 INCHES MAXIMUM |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 |
| TERMINAL TYPE | WIRE LEAD |
| STYLE DESIGNATOR | AXIAL TERMINAL EACH END |
| ELECTRICAL RESISTANCE | 2.200 OHMS |
| INCLOSURE METHOD | ENCAPSULATED |
Restrictions/Controls & Freight Information | NSN 5905-01-118-0010
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| NMF Description | 062960 | REOSTATS/PARTS NOI |
| Less than car load rating | ||
| Less than truck load rating | P | 77.5 |
| Water commodity Code | 72D | unknown |
| Originating Activity Code | TX | Defense Supply Center Columbus Columbus, OH 43218 |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | H | Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |



